Re: [Bluez-users] bt3c_cs time out - no firmware loaded? - problem persists.

On Monday 12 May 2003 22:29, Max Krasnyansky wrote:

At 06:43 AM 5/8/2003, Krisztian Mark Szentes wrote:

quoted

May  8 15:02:20 tomcat cardmgr[1071]: socket 0: 3Com Bluetooth PC Card
May  8 15:02:20 tomcat cardmgr[1071]: executing: 'modprobe bt3c_cs'
May  8 15:02:21 tomcat hcid[1428]: HCI dev 0 registered
May  8 15:02:31 tomcat hcid[1616]: Can't init device hci0. Connection
timed out(110)

Hmm, you should see bluefw messages before HCI dev 0 registered.
I guess you'd need to ping Marcel on that one.

I observed cardmgr to cause a line
cardmgr[xxx]: executing: 'modprobe bt3c_cs' line

I deleted the /sbin/bluefw symlink to /usr/sbin/bluefw to see if it gets 
invoked, which gives:
bt3c_cs: Failed to exec "/sbin/bluefw pccard 03f8".

in /proc/ioports bt3c_cs shows up at 000003f8-000003ff

if I manually call /usb/sbin/bluefw pccard 03f8 it gives no error; but it 
does not touch the /etc/bluetooth/firmware/BT3CPCC.bin file either.
I tried the bluez-bluefw both in version 1.0-1 and 0.9-2 (powerpc) and 
compiled 1.0 from source, but the firmware still does not even get 
touched, let alone loaded. And I get no bluefw messages in syslog.


Any hints?

Mark

P.S. The /sbin/bluefw symlink is not included in the Debian packages but 
the kernel module loads this and not /usr/sbin/bluefw.
-- 
produktivIT   -  Open-Source Solution Provider
Siebenbrunnengasse 55/7
A-1050 Wien



-------------------------------------------------------
Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
The only event dedicated to issues related to Linux enterprise solutions
www.enterpriselinuxforum.com

_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users