This series adds support for the USB3 PHY integrated in the CIX Sky1
SoC.
Patch 1 adds the device tree binding, patch 2 the PHY driver, and
patch 3 the SoC node plus the board enablement.
The PHY provides the SuperSpeed lanes for the Cadence USBSSP
controllers of the SoC. The block drives both USB3 lanes: it is
exposed as a single PHY provider with #phy-cells = <0>, and its
init/exit calls are reference counted so that both controllers can
share it.
Tested on Radxa Orion O6 (Sky1) together with the USBSSP controller
series: the PHY probes and USB 3.x devices enumerate at SuperSpeed.
The controller device tree nodes use the PHY phandle added here; the
USBSSP controller series is posted separately.
The series applies on top of v7.4-rc1.
Changes in v6:
- Drop the per-port child nodes; the PHY provider node itself is
referenced with #phy-cells = <0> and the driver exports a single
PHY instance shared by both controllers.
- Select REGMAP in the PHY Kconfig.
- Use dev_err_probe() for the reset, clock and regmap acquisition
failures in the probe path.
- Corrected the mail sender name: v5 was sent with a non-ASCII
display name in the From header, v6 uses the plain ASCII name
that matches the Signed-off-by.
Changes in v5:
- Documented the origin of the PHY initialization sequence.
- Return -ENODEV instead of -EINVAL when the OF match data is missing.
- Use dev_err_probe() when creating the child PHYs.
- Dropped the unused dev_set_drvdata() call.
- Guarded against underflow in sky1_u3phy_exit().
Changes in v4:
- Fixed the #size-cells property order and removed the unused phy.h
include and the redundant status properties of the PHY port nodes.
Hongliang Yang (3):
dt-bindings: phy: Add CIX Sky1 USB3 PHY
phy: cix: Add CIX Sky1 USB3 PHY driver
arm64: dts: cix: Add USB3 PHY nodes for Sky1
.../bindings/phy/cix,sky1-usb3-phy.yaml | 73 ++++
MAINTAINERS | 2 +
arch/arm64/boot/dts/cix/sky1-orion-o6.dts | 4 +
arch/arm64/boot/dts/cix/sky1.dtsi | 14 +
drivers/phy/Kconfig | 1 +
drivers/phy/Makefile | 1 +
drivers/phy/cix/Kconfig | 21 +
drivers/phy/cix/Makefile | 6 +
drivers/phy/cix/phy-cix-usb3.c | 404 ++++++++++++++++++
drivers/phy/cix/phy-cix-usbdp.h | 289 +++++++++++++
10 files changed, 815 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/cix,sky1-usb3-phy.yaml
create mode 100644 drivers/phy/cix/Kconfig
create mode 100644 drivers/phy/cix/Makefile
create mode 100644 drivers/phy/cix/phy-cix-usb3.c
create mode 100644 drivers/phy/cix/phy-cix-usbdp.h
base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
--
2.54.0