[PATCH v14 03/15] accel/rocket: wait for a running IRQ handler before resetting a core

@@ -377,9 +377,74 @@ rocket_reset(struct rocket_core *core, struct drm_sched_job *bad)
 	drm_sched_stop(&core->sched, bad);
 
 	/*
-	 * Remaining interrupts have been handled, but we might still have
-	 * stuck jobs. Let's make sure the PM counters stay balanced by
-	 * manually calling pm_runtime_put_noidle().
+	 * Mask the block before waiting. hw_submit() arms INTERRUPT_MASK on
+	 * every submit and only the hardirq clears it, so on an ordinary
+	 * timeout it is still live and a completion can arrive after the sync
+	 * returns. The next submit re-arms it, so nothing is lost here.
+	 *
+	 * Only when the device is already awake, though. This function holds no
+	 * runtime PM reference of its own: the only one in the window belongs to
+	 * in_flight_job, and the completion path may have put it and cleared the
+	 * pointer before the timeout worker got here. drm_sched_stop() above can
+	 * block for a long time, and it drops every pending job's credits, so
+	 * rocket_job_is_idle() is true and nothing keeps the core resumed. On
+	 * this hardware a register access with the domain down takes an async
+	 * SError, so a reset must not be the thing that causes one.
+	 *
+	 * Only a positive answer will do. pm_runtime_get_if_active() tests
+	 * power.disable_depth before power.runtime_status, so -EINVAL MASKS a
+	 * suspended device rather than excluding one: pm_runtime_force_suspend(),
+	 * which is this driver's own system suspend callback, disables runtime PM
+	 * first and turns the clocks off second, and rocket_core_fini() suspends
+	 * the core and disables before it cancels the timeout worker. Both leave
+	 * the domain down with -EINVAL on offer.
+	 *
+	 * The cost is the other half of that ambiguity. A core that is still up
+	 * with runtime PM disabled (pm_runtime_force_suspend() before its
+	 * callback has run, or CONFIG_PM=n under COMPILE_TEST) is left unmasked,
+	 * because writing to it would mean writing to the half that is down as
+	 * well.
+	 *
+	 * Clear the raw status along with the mask, the way the completion path
+	 * does. Masking alone leaves the DPU bit latched until
+	 * rocket_core_reset(), and the hardirq decides on raw status alone, so a
+	 * fault from the IOMMU that shares this line would wake the thread again
+	 * and what the comment below asserts would stop being true.
+	 *
+	 * UNDER job_lock, because rocket_job_hw_submit() arms this same
+	 * register and always runs under that lock. reset.pending is set here
+	 * without the lock and read there with it, so a submit that has already
+	 * passed its check can re-arm the mask after this clears it, and then
+	 * the synchronize_irq() below fences a handler that is no longer the
+	 * one that matters: the block is left running a task with its
+	 * interrupt live. rocket_job_handle_irq() avoids the same race on
+	 * OPERATION_ENABLE by making its completion writes under this lock.
+	 *
+	 * pm_runtime_get_if_active() does not invoke a callback -- it only
+	 * takes a reference on an already-active device -- and
+	 * pm_runtime_put_autosuspend() is asynchronous, so neither can re-enter
+	 * this driver's runtime PM callbacks while the lock is held.
+	 */
+	scoped_guard(mutex, &core->job_lock) {
+		if (pm_runtime_get_if_active(core->dev) > 0) {
+			rocket_pc_writel(core, INTERRUPT_MASK, 0x0);
+			rocket_pc_writel(core, INTERRUPT_CLEAR, 0x1ffff);
+			pm_runtime_put_autosuspend(core->dev);
+		}
+	}
+
+	/*
+	 * drm_sched_stop() returns without waiting for a threaded handler that
+	 * is already running, so wait for one here. This has to stay outside
+	 * job_lock: the handler takes that lock, so waiting for it while
+	 * holding it would deadlock instead of fencing anything.
+	 */
+	synchronize_irq(core->irq);
+
+	/*
+	 * No handler is running now, but we might still have stuck jobs. Let's
+	 * make sure the PM counters stay balanced by manually calling
+	 * pm_runtime_put_noidle().
 	 */
 	scoped_guard(mutex, &core->job_lock) {
 		if (core->in_flight_job)