[PATCH v2 02/14] iio: adc: stm32-adc: core: manage clock prescaler diversity

@@ -50,6 +50,8 @@
  * @ovr_msk:    array of ovr (overrun flag) masks in csr for adc1..n
  * @ier:	interrupt enable register offset for each adc
  * @eocie_msk:	end of conversion interrupt enable mask in @ier
+ * @presc_msk:	prescaler mask in ccr
+ * @presc_shift: prescaler bit shift in ccr
  */
 struct stm32_adc_common_regs {
 	u32 csr;

@@ -58,6 +60,8 @@ struct stm32_adc_common_regs {
 	u32 ovr_msk[STM32_ADC_MAX_ADCS];
 	u32 ier;
 	u32 eocie_msk;
+	u32 presc_msk;
+	u32 presc_shift;
 };
 
 struct stm32_adc_priv;

@@ -66,6 +70,8 @@ struct stm32_adc_priv;
  * struct stm32_adc_priv_cfg - stm32 core compatible configuration data
  * @regs:	common registers for all instances
  * @clk_sel:	clock selection routine
+ * @presc:	clock prescaler array
+ * @num_presc:	number of clock prescalers in presc array
  * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
  * @ipid:	adc identification number
  * @has_syscfg: SYSCFG capability flags

@@ -75,6 +81,8 @@ struct stm32_adc_priv;
 struct stm32_adc_priv_cfg {
 	const struct stm32_adc_common_regs *regs;
 	int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *);
+	unsigned int *presc;
+	unsigned int num_presc;
 	u32 max_clk_rate_hz;
 	u32 ipid;
 	unsigned int has_syscfg;

@@ -126,22 +134,22 @@ static struct stm32_adc_priv *to_stm32_adc_priv(struct stm32_adc_common *com)
 }
 
 /* STM32F4 ADC internal common clock prescaler division ratios */
-static int stm32f4_pclk_div[] = {2, 4, 6, 8};
+static unsigned int stm32f4_pclk_div[] = { 2, 4, 6, 8 };
 
 /**
- * stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler
+ * stm32_adc_clk_sel() - Select stm32f4 ADC common clock prescaler
  * @pdev: platform device
  * @priv: stm32 ADC core private data
  * Select clock prescaler used for analog conversions, before using ADC.
  */
-static int stm32f4_adc_clk_sel(struct platform_device *pdev,
-			       struct stm32_adc_priv *priv)
+static int stm32_adc_clk_sel(struct platform_device *pdev,
+			     struct stm32_adc_priv *priv)
 {
 	unsigned long rate;
 	u32 val;
 	int i;
 
-	/* stm32f4 has one clk input for analog (mandatory), enforce it here */
+	/* This ADC has one clk input for analog (mandatory), enforce it here */
 	if (!priv->aclk) {
 		dev_err(&pdev->dev, "No 'adc' clock found\n");
 		return -ENOENT;

@@ -153,20 +161,20 @@ static int stm32f4_adc_clk_sel(struct platform_device *pdev,
 		return -EINVAL;
 	}
 
-	for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
-		if ((rate / stm32f4_pclk_div[i]) <= priv->max_clk_rate)
+	for (i = 0; i < priv->cfg->num_presc; i++) {
+		if ((rate / priv->cfg->presc[i]) <= priv->max_clk_rate)
 			break;
 	}
-	if (i >= ARRAY_SIZE(stm32f4_pclk_div)) {
+	if (i >= priv->cfg->num_presc) {
 		dev_err(&pdev->dev, "adc clk selection failed\n");
 		return -EINVAL;
 	}
 
-	priv->common.rate = rate / stm32f4_pclk_div[i];
-	val = readl_relaxed(priv->common.base + STM32F4_ADC_CCR);
-	val &= ~STM32F4_ADC_ADCPRE_MASK;
-	val |= i << STM32F4_ADC_ADCPRE_SHIFT;
-	writel_relaxed(val, priv->common.base + STM32F4_ADC_CCR);
+	priv->common.rate = rate / priv->cfg->presc[i];
+	val = readl_relaxed(priv->common.base + priv->cfg->regs->ccr);
+	val &= ~priv->cfg->regs->presc_msk;
+	val |= i << priv->cfg->regs->presc_shift;
+	writel_relaxed(val, priv->common.base + priv->cfg->regs->ccr);
 
 	dev_dbg(&pdev->dev, "Using analog clock source at %ld kHz\n",
 		priv->common.rate / 1000);

@@ -314,6 +322,8 @@ static const struct stm32_adc_common_regs stm32f4_adc_common_regs = {
 	.ovr_msk = { STM32F4_OVR1, STM32F4_OVR2, STM32F4_OVR3 },
 	.ier = STM32F4_ADC_CR1,
 	.eocie_msk = STM32F4_EOCIE,
+	.presc_msk = STM32F4_ADC_ADCPRE_MASK,
+	.presc_shift = STM32F4_ADC_ADCPRE_SHIFT,
 };
 
 /* STM32H7 common registers definitions */

@@ -850,7 +860,9 @@ static DEFINE_RUNTIME_DEV_PM_OPS(stm32_adc_core_pm_ops,
 
 static const struct stm32_adc_priv_cfg stm32f4_adc_priv_cfg = {
 	.regs = &stm32f4_adc_common_regs,
-	.clk_sel = stm32f4_adc_clk_sel,
+	.clk_sel = stm32_adc_clk_sel,
+	.presc = stm32f4_pclk_div,
+	.num_presc = ARRAY_SIZE(stm32f4_pclk_div),
 	.max_clk_rate_hz = 36000000,
 	.num_irqs = 1,
 	.num_adcs = 3,