Re: [PATCH net-next v2 0/5] net: stmmac: Add common RGMII delay handling and DP1000 support

Hello:

This series was applied to netdev/net-next.git (main)
by Paolo Abeni [off-list ref]:

On Mon, 07 Sep 2026 15:46:49 +0800 you wrote:

The UltraRISC DP1000 integrates a Synopsys DesignWare GMAC from the 5.20
series with fixed internal delays on both TX and RX RGMII clock paths.

For boards without PCB delays, "rgmii-id" describes the link. Passing this
mode unchanged to the PHY would enable another pair of delays and break
RGMII timing.

[...]

Here is the summary with links:
  - [net-next,v2,1/5] net: stmmac: Add common internal RGMII delay handling
    https://git.kernel.org/netdev/net-next/c/cc54f9667188
  - [net-next,v2,2/5] net: stmmac: sophgo: Use common RGMII delay handling
    https://git.kernel.org/netdev/net-next/c/7d1cbb9ba933
  - [net-next,v2,3/5] net: stmmac: eic7700: Use common RGMII delay handling
    https://git.kernel.org/netdev/net-next/c/345d78e30980
  - [net-next,v2,4/5] dt-bindings: net: Add UltraRISC DP1000 GMAC
    https://git.kernel.org/netdev/net-next/c/8dbfb46c233a
  - [net-next,v2,5/5] net: stmmac: Add UltraRISC DP1000 GMAC support
    https://git.kernel.org/netdev/net-next/c/c6ff098cb63a

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html