[PATCH v8 09/16] arm64: dts: st: add pwm2/pwm4 pins for stm32mp25
From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Date: 2026-08-20 09:17:54
Also in:
linux-devicetree, lkml
Subsystem:
arm/stm32 architecture, the rest · Maintainers:
Maxime Coquelin, Alexandre Torgue, Linus Torvalds
Add the pwm2 and pwm4 pins used on MicroGEA-STM32MP257D-RMM board. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- (no changes since v1) arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
index 6482dd47e977..695c9d771853 100644
--- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi@@ -433,6 +433,23 @@ pins { }; }; + /omit-if-no-ref/ + pwm2_pins_a: pwm2-0 { + pins { + pinmux = <STM32_PINMUX('I', 7, AF7)>; /* TIM2_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + pwm2_sleep_pins_a: pwm2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('I', 7, ANALOG)>; /* TIM2_CH1 */ + }; + }; + /omit-if-no-ref/ pwm3_pins_a: pwm3-0 { pins {
@@ -450,6 +467,23 @@ pins { }; }; + /omit-if-no-ref/ + pwm4_pins_a: pwm4-0 { + pins { + pinmux = <STM32_PINMUX('A', 12, AF7)>; /* TIM4_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + pwm4_sleep_pins_a: pwm4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 12, ANALOG)>; /* TIM4_CH1 */ + }; + }; + /omit-if-no-ref/ pwm8_pins_a: pwm8-0 { pins {
--
2.43.0