[PATCH v8 05/16] arm64: dts: st: add CAN1 support on stm32mp25
flat view
COLD26d
IN LINUX-NEXT
From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Date: 2026-08-20 09:17:40
Also in:
linux-devicetree, lkml
Subsystem:
arm/stm32 architecture, the rest · Maintainers:
Maxime Coquelin, Alexandre Torgue, Linus Torvalds
Queued in linux-next as 7e62731fba26 on 2026-09-11.
The controller is compliant with ISO 11898-1: 2015 (CAN protocol specification version 2.0 part A, B) and CAN FD protocol specification version 1.0. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- (no changes since v2) Changes in v2: - Add resets property to dts CAN node. Suggested by Sashiko. arch/arm64/boot/dts/st/stm32mp253.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/st/stm32mp253.dtsi b/arch/arm64/boot/dts/st/stm32mp253.dtsi
index eeceb086252b..7e82f01fdc10 100644
--- a/arch/arm64/boot/dts/st/stm32mp253.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp253.dtsi@@ -43,6 +43,22 @@ &optee { }; &rifsc { + m_can1: can@402d0000 { + compatible = "bosch,m_can"; + reg = <0x402d0000 0x400>, <0x40310000 0xd50>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&rcc CK_BUS_FDCAN>, <&rcc CK_KER_FDCAN>; + clock-names = "hclk", "cclk"; + resets = <&rcc FDCAN_R>; + bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; + access-controllers = <&rifsc 56>; + power-domains = <&CLUSTER_PD>; + status = "disabled"; + }; + ethernet2: ethernet@482d0000 { compatible = "st,stm32mp25-dwmac", "snps,dwmac-5.20"; reg = <0x482d0000 0x4000>;
--
2.43.0