[PATCH v9 01/38] dt-bindings: phy: rockchip-usbdp: add improved ports scheme
From: Sebastian Reichel <hidden>
Date: 2026-07-01 23:35:50
Also in:
linux-devicetree, linux-phy, linux-rockchip, linux-usb, lkml
Subsystem:
generic phy framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Currently the Rockchip USBDP PHY is missing a documented port scheme. Meanwhile upstream RK3588 DTS files are a bit messy and use different port schemes. The upstream USBDP PHY Linux kernel driver does not yet parse the ports at all and thus does not create any implicit ABI either. But with the current mess it is not possible to properly support USB-C DP AltMode. Thus this introduces a proper port scheme following roughly the ports design of the Qualcomm QMP USB4-USB3-DP PHY controller binding with a slight difference that there is an additional port for the USB-C SBU port as the Rockchip USB-DP PHY also contains the SBU mux. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Sebastian Reichel <redacted> --- .../bindings/phy/phy-rockchip-usbdp.yaml | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
index 8b7059d5b182..c1a1384118da 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml@@ -114,6 +114,29 @@ properties: A port node to link the PHY to a TypeC controller for the purpose of handling orientation switching. + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Output endpoint of the PHY for USB (or DP when configured into 4 lane + mode), which should point to the superspeed port of a USB connector. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Incoming endpoint from the USB controller + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Incoming endpoint from the DisplayPort controller + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + Output endpoint of the PHY for DP Auxiliary, which should either point to + the SBU port of a USB-C connector or a DisplayPort connector input port. + required: - compatible - reg
--
2.53.0