[PATCH 2/3] ARM: dts: tqma7: add boot phase properties
From: Alexander Feilke <hidden>
Date: 2026-02-18 13:56:03
Also in:
imx, linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest, tq systems board & driver support · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
Adds boot phase properties to essential resources in tqma7 device trees. Signed-off-by: Alexander Feilke <redacted> --- arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi | 4 ++++ arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi | 2 ++ 2 files changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
index 4d948a9757f9..03f2f2cbdfbc 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi@@ -477,6 +477,7 @@ pinctrl_uart5: uart5grp { }; pinctrl_uart6: uart6grp { + bootph-pre-ram; fsl,pins = <MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x7d>, <MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x75>,
@@ -511,6 +512,7 @@ pinctrl_usdhc1: usdhc1grp { <MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5e>, <MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5e>, <MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5e>; + bootph-pre-ram; }; pinctrl_usdhc1_100mhz: usdhc1_100mhzgrp {
@@ -602,6 +604,7 @@ &uart6 { pinctrl-0 = <&pinctrl_uart6>; assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + bootph-pre-ram; status = "okay"; };
@@ -646,6 +649,7 @@ &usdhc1 { no-1-8-v; no-sdio; no-mmc; + bootph-pre-ram; status = "okay"; };
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index 2966a33bc528..3a01b1cfb5fa 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi@@ -214,6 +214,7 @@ pinctrl_usdhc3: usdhc3grp { <MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59>, <MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59>, <MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19>; + bootph-pre-ram; }; pinctrl_usdhc3_100mhz: usdhc3_100mhzgrp {
@@ -288,6 +289,7 @@ &usdhc3 { no-sdio; vmmc-supply = <&vgen4_reg>; vqmmc-supply = <&sw2_reg>; + bootph-pre-ram; status = "okay"; };
--
2.43.0