[PATCH 4/4] arm64: dts: imx8mp-kontron: Use GPIO/IRQ defines in DL devicetree
From: Frieder Schrempf <hidden>
Date: 2026-02-18 13:31:04
Also in:
imx, linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
From: Frieder Schrempf <redacted> To make the code more readable, use the macros for the GPIO and IRQ settings. Signed-off-by: Frieder Schrempf <redacted> --- arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
index 7131e9a499ae1..41a2bb74f1565 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso@@ -7,6 +7,7 @@ /plugin/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "imx8mp-pinfunc.h" &{/} {
@@ -80,11 +81,11 @@ touchscreen@5d { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_touch>; interrupt-parent = <&gpio1>; - interrupts = <6 8>; - irq-gpios = <&gpio1 6 0>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + irq-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; AVDD28-supply = <®_vcc_panel>; VDDIO-supply = <®_vcc_panel>; - reset-gpios = <&gpio1 7 0>; + reset-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; };
--
2.52.0