Hello Heiko, Damon,

On Mon Jan 19, 2026 at 5:06 PM CET, Heiko Stübner wrote:

Hi Damon,

Am Mittwoch, 17. Dezember 2025, 10:33:03 Mitteleuropäische Normalzeit schrieb Damon Ding:

quoted

PATCH 1 is to ensure the last bridge declares OP_EDID or OP_MODES or both.
PATCH 2 is a small format optimization for struct analogid_dp_device.
PATCH 3 is to perform mode setting in &drm_bridge_funcs.atomic_enable.
PATCH 4 is to add a new parameter to store the point of next bridge.
PATCH 5 is to make legacy bridge driver more universal.
PATCH 6-11 are preparations for apply drm_bridge_connector helper.
PATCH 12 is to apply the drm_bridge_connector helper.
PATCH 13-15 are to move the panel/bridge parsing to the Analogix side.
PATCH 16 is to attach the next bridge on Analogix side uniformly.
PATCH 17-18 are to apply the panel_bridge helper.

On top of all the recent bridge-related commits, this series still works
on my rk3588-eDP board - when the display is plugged in on boot.

As that is the current state we also had before, this series:
Tested-by: Heiko Stuebner <heiko@sntech.de> on rk3588

I'm appplying patches 1-3 and got a checkpatch warning for each patch:

  WARNING: Unexpected content after email: 'Heiko Stuebner [off-list ref] on rk3588', should be: 'Heiko Stuebner [off-list ref] (on rk3588)'

I'm fixing it while applying those 3 patches.

Damon, can you fix that for the remaining patches before sending a new
iteration?

Luca

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com