@@ -247,6 +247,33 @@ static bool cache_has_usable_cpor(struct mpam_class *class)
 	return class->props.cpbm_wd <= 32;
 }
 
+static bool mba_class_use_mbw_max(struct mpam_props *cprops)
+{
+	return (mpam_has_feature(mpam_feat_mbw_max, cprops) &&
+		cprops->bwa_wd);
+}
+
+static bool class_has_usable_mba(struct mpam_props *cprops)
+{
+	return mba_class_use_mbw_max(cprops);
+}
+
+/*
+ * Calculate the worst-case percentage change from each implemented step
+ * in the control.
+ */
+static u32 get_mba_granularity(struct mpam_props *cprops)
+{
+	if (!mba_class_use_mbw_max(cprops))
+		return 0;
+
+	/*
+	 * bwa_wd is the number of bits implemented in the 0.xxx
+	 * fixed point fraction. 1 bit is 50%, 2 is 25% etc.
+	 */
+	return DIV_ROUND_UP(MAX_MBA_BW, 1 << cprops->bwa_wd);
+}
+
 /*
  * Each fixed-point hardware value architecturally represents a range
  * of values: the full range 0% - 100% is split contiguously into

@@ -287,6 +314,96 @@ static u16 percent_to_mbw_max(u8 pc, struct mpam_props *cprops)
 	return val;
 }
 
+static u32 get_mba_min(struct mpam_props *cprops)
+{
+	u32 val = 0;
+
+	if (mba_class_use_mbw_max(cprops))
+		val = mbw_max_to_percent(val, cprops);
+	else
+		WARN_ON_ONCE(1);
+
+	return val;
+}
+
+/* Find the L3 cache that has affinity with this CPU */
+static int find_l3_equivalent_bitmask(int cpu, cpumask_var_t tmp_cpumask)
+{
+	u32 cache_id = get_cpu_cacheinfo_id(cpu, 3);
+
+	lockdep_assert_cpus_held();
+
+	return mpam_get_cpumask_from_cache_id(cache_id, 3, tmp_cpumask);
+}
+
+/*
+ * topology_matches_l3() - Is the provided class the same shape as L3
+ * @victim:		The class we'd like to pretend is L3.
+ *
+ * resctrl expects all the world's a Xeon, and all counters are on the
+ * L3. We play fast and loose with this, mapping counters on other
+ * classes - provided the CPU->domain mapping is the same kind of shape.
+ *
+ * Using cacheinfo directly would make this work even if resctrl can't
+ * use the L3 - but cacheinfo can't tell us anything about offline CPUs.
+ * Using the L3 resctrl domain list also depends on CPUs being online.
+ * Using the mpam_class we picked for L3 so we can use its domain list
+ * assumes that there are MPAM controls on the L3.
+ * Instead, this path eventually uses the mpam_get_cpumask_from_cache_id()
+ * helper which can tell us about offline CPUs ... but getting the cache_id
+ * to start with relies on at least one CPU per L3 cache being online at
+ * boot.
+ *
+ * Walk the victim component list and compare the affinity mask with the
+ * corresponding L3. The topology matches if each victim:component's affinity
+ * mask is the same as the CPU's corresponding L3's. These lists/masks are
+ * computed from firmware tables so don't change at runtime.
+ */
+static bool topology_matches_l3(struct mpam_class *victim)
+{
+	int cpu, err;
+	struct mpam_component *victim_iter;
+	cpumask_var_t __free(free_cpumask_var) tmp_cpumask;
+
+	if (!alloc_cpumask_var(&tmp_cpumask, GFP_KERNEL))
+		return false;
+
+	guard(srcu)(&mpam_srcu);
+	list_for_each_entry_srcu(victim_iter, &victim->components, class_list,
+				 srcu_read_lock_held(&mpam_srcu)) {
+		if (cpumask_empty(&victim_iter->affinity)) {
+			pr_debug("class %u has CPU-less component %u - can't match L3!\n",
+				 victim->level, victim_iter->comp_id);
+			return false;
+		}
+
+		cpu = cpumask_any(&victim_iter->affinity);
+		if (WARN_ON_ONCE(cpu >= nr_cpu_ids))
+			return false;
+
+		cpumask_clear(tmp_cpumask);
+		err = find_l3_equivalent_bitmask(cpu, tmp_cpumask);
+		if (err) {
+			pr_debug("Failed to find L3's equivalent component to class %u component %u\n",
+				 victim->level, victim_iter->comp_id);
+			return false;
+		}
+
+		/* Any differing bits in the affinity mask? */
+		if (!cpumask_equal(tmp_cpumask, &victim_iter->affinity)) {
+			pr_debug("class %u component %u has Mismatched CPU mask with L3 equivalent\n"
+				 "L3:%*pbl != victim:%*pbl\n",
+				 victim->level, victim_iter->comp_id,
+				 cpumask_pr_args(tmp_cpumask),
+				 cpumask_pr_args(&victim_iter->affinity));
+
+			return false;
+		}
+	}
+
+	return true;
+}
+
 /* Test whether we can export MPAM_CLASS_CACHE:{2,3}? */
 static void mpam_resctrl_pick_caches(void)
 {

@@ -329,10 +446,63 @@ static void mpam_resctrl_pick_caches(void)
 	}
 }
 
+static void mpam_resctrl_pick_mba(void)
+{
+	struct mpam_class *class, *candidate_class = NULL;
+	struct mpam_resctrl_res *res;
+
+	lockdep_assert_cpus_held();
+
+	guard(srcu)(&mpam_srcu);
+	list_for_each_entry_srcu(class, &mpam_classes, classes_list,
+				 srcu_read_lock_held(&mpam_srcu)) {
+		struct mpam_props *cprops = &class->props;
+
+		if (class->level < 3) {
+			pr_debug("class %u is before L3\n", class->level);
+			continue;
+		}
+
+		if (!class_has_usable_mba(cprops)) {
+			pr_debug("class %u has no bandwidth control\n",
+				 class->level);
+			continue;
+		}
+
+		if (!cpumask_equal(&class->affinity, cpu_possible_mask)) {
+			pr_debug("class %u has missing CPUs\n", class->level);
+			continue;
+		}
+
+		if (!topology_matches_l3(class)) {
+			pr_debug("class %u topology doesn't match L3\n",
+				 class->level);
+			continue;
+		}
+
+		/*
+		 * mba_sc reads the mbm_local counter, and waggles the MBA
+		 * controls. mbm_local is implicitly part of the L3, pick a
+		 * resource to be MBA that as close as possible to the L3.
+		 */
+		if (!candidate_class || class->level < candidate_class->level)
+			candidate_class = class;
+	}
+
+	if (candidate_class) {
+		pr_debug("selected class %u to back MBA\n",
+			 candidate_class->level);
+		res = &mpam_resctrl_controls[RDT_RESOURCE_MBA];
+		res->class = candidate_class;
+		exposed_alloc_capable = true;
+	}
+}
+
 static int mpam_resctrl_control_init(struct mpam_resctrl_res *res,
 				     enum resctrl_res_level type)
 {
 	struct mpam_class *class = res->class;
+	struct mpam_props *cprops = &class->props;
 	struct rdt_resource *r = &res->resctrl_res;
 
 	switch (r->rid) {

@@ -361,6 +531,20 @@ static int mpam_resctrl_control_init(struct mpam_resctrl_res *res,
 		 * 'all the bits' is the correct answer here.
 		 */
 		r->cache.shareable_bits = resctrl_get_default_ctrl(r);
+		break;
+	case RDT_RESOURCE_MBA:
+		r->alloc_capable = true;
+		r->schema_fmt = RESCTRL_SCHEMA_RANGE;
+		r->ctrl_scope = RESCTRL_L3_CACHE;
+
+		r->membw.delay_linear = true;
+		r->membw.throttle_mode = THREAD_THROTTLE_UNDEFINED;
+		r->membw.min_bw = get_mba_min(cprops);
+		r->membw.max_bw = MAX_MBA_BW;
+		r->membw.bw_gran = get_mba_granularity(cprops);
+
+		r->name = "MB";
+
 		break;
 	default:
 		break;

@@ -376,7 +560,17 @@ static int mpam_resctrl_pick_domain_id(int cpu, struct mpam_component *comp)
 	if (class->type == MPAM_CLASS_CACHE)
 		return comp->comp_id;
 
-	/* TODO: repaint domain ids to match the L3 domain ids */
+	if (topology_matches_l3(class)) {
+		/* Use the corresponding L3 component ID as the domain ID */
+		int id = get_cpu_cacheinfo_id(cpu, 3);
+
+		/* Implies topology_matches_l3() made a mistake */
+		if (WARN_ON_ONCE(id == -1))
+			return comp->comp_id;
+
+		return id;
+	}
+
 	/*
 	 * Otherwise, expose the ID used by the firmware table code.
 	 */

@@ -418,6 +612,12 @@ u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_ctrl_domain *d,
 	case RDT_RESOURCE_L3:
 		configured_by = mpam_feat_cpor_part;
 		break;
+	case RDT_RESOURCE_MBA:
+		if (mpam_has_feature(mpam_feat_mbw_max, cprops)) {
+			configured_by = mpam_feat_mbw_max;
+			break;
+		}
+		fallthrough;
 	default:
 		return resctrl_get_default_ctrl(r);
 	}

@@ -429,6 +629,8 @@ u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_ctrl_domain *d,
 	switch (configured_by) {
 	case mpam_feat_cpor_part:
 		return cfg->cpbm;
+	case mpam_feat_mbw_max:
+		return mbw_max_to_percent(cfg->mbw_max, cprops);
 	default:
 		return resctrl_get_default_ctrl(r);
 	}

@@ -473,6 +675,13 @@ int resctrl_arch_update_one(struct rdt_resource *r, struct rdt_ctrl_domain *d,
 		cfg.cpbm = cfg_val;
 		mpam_set_feature(mpam_feat_cpor_part, &cfg);
 		break;
+	case RDT_RESOURCE_MBA:
+		if (mpam_has_feature(mpam_feat_mbw_max, cprops)) {
+			cfg.mbw_max = percent_to_mbw_max(cfg_val, cprops);
+			mpam_set_feature(mpam_feat_mbw_max, &cfg);
+			break;
+		}
+		fallthrough;
 	default:
 		return -EINVAL;
 	}

@@ -754,6 +963,7 @@ int mpam_resctrl_setup(void)
 
 	/* Find some classes to use for controls */
 	mpam_resctrl_pick_caches();
+	mpam_resctrl_pick_mba();
 
 	/* Initialise the resctrl structures from the classes */
 	for (enum resctrl_res_level i = 0; i < RDT_NUM_RESOURCES; i++) {