[PATCH 12/15] mtd: nand: sunxi: introduce reg_spare_area in sunxi_nfc_caps
From: Richard Genoud <richard.genoud@bootlin.com>
Date: 2025-10-10 08:42:00
Also in:
linux-devicetree, linux-sunxi, lkml
Subsystem:
memory technology devices (mtd), nand flash subsystem, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Linus Torvalds
The H6/H616 spare area register is not at the same offset as the A10/A23 one, so move its offset into sunxi_nfc_caps. No functional change. Signed-off-by: Richard Genoud <richard.genoud@bootlin.com> --- drivers/mtd/nand/raw/sunxi_nand.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index 8921e66e0c6d..80aafa4e1844 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c@@ -54,7 +54,8 @@ #define NFC_REG_ECC_ERR_CNT(nfc, x) ((nfc->caps->reg_ecc_err_cnt + (x)) & ~0x3) #define NFC_REG_A10_USER_DATA 0x0050 #define NFC_REG_USER_DATA(nfc, x) (nfc->caps->reg_user_data + ((x) * 4)) -#define NFC_REG_SPARE_AREA 0x00A0 +#define NFC_REG_SPARE_AREA(nfc) (nfc->caps->reg_spare_area) +#define NFC_REG_A10_SPARE_AREA 0x00A0 #define NFC_REG_PAT_ID(nfc) (nfc->caps->reg_pat_id) #define NFC_REG_A10_PAT_ID 0x00A4 #define NFC_REG_MDMA_ADDR 0x00C0
@@ -228,6 +229,7 @@ static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand) * @reg_io_data: I/O data register * @reg_ecc_err_cnt: ECC error counter register * @reg_user_data: User data register + * @reg_spare_area: Spare Area Register * @reg_pat_id: Pattern ID Register * @reg_pat_found: Data Pattern Status Register * @random_en_mask: RANDOM_EN mask in NFC_ECC_CTL register
@@ -244,6 +246,7 @@ struct sunxi_nfc_caps { unsigned int reg_io_data; unsigned int reg_ecc_err_cnt; unsigned int reg_user_data; + unsigned int reg_spare_area; unsigned int reg_pat_id; unsigned int reg_pat_found; unsigned int random_en_mask;
@@ -466,7 +469,7 @@ static void sunxi_nfc_select_chip(struct nand_chip *nand, unsigned int cs) if (sel->rb >= 0) ctl |= NFC_RB_SEL(sel->rb); - writel(mtd->writesize, nfc->regs + NFC_REG_SPARE_AREA); + writel(mtd->writesize, nfc->regs + NFC_REG_SPARE_AREA(nfc)); if (nfc->clk_rate != sunxi_nand->clk_rate) { clk_set_rate(nfc->mod_clk, sunxi_nand->clk_rate);
@@ -2226,6 +2229,7 @@ static const struct sunxi_nfc_caps sunxi_nfc_a10_caps = { .reg_io_data = NFC_REG_A10_IO_DATA, .reg_ecc_err_cnt = NFC_REG_A10_ECC_ERR_CNT, .reg_user_data = NFC_REG_A10_USER_DATA, + .reg_spare_area = NFC_REG_A10_SPARE_AREA, .reg_pat_id = NFC_REG_A10_PAT_ID, .reg_pat_found = NFC_REG_ECC_ST, .random_en_mask = BIT(9),
@@ -2243,6 +2247,7 @@ static const struct sunxi_nfc_caps sunxi_nfc_a23_caps = { .reg_io_data = NFC_REG_A23_IO_DATA, .reg_ecc_err_cnt = NFC_REG_A10_ECC_ERR_CNT, .reg_user_data = NFC_REG_A10_USER_DATA, + .reg_spare_area = NFC_REG_A10_SPARE_AREA, .reg_pat_id = NFC_REG_A10_PAT_ID, .reg_pat_found = NFC_REG_ECC_ST, .random_en_mask = BIT(9),
--
2.47.3