Hi Marc, Vinod and all

     dt-bindings: phy: ti,tcan104x-can: Document NXP TJA105X/1048
     phy: phy-can-transceiver: Introduce can_transceiver_priv
     phy: phy-can-transceiver: Add dual channel support for TJA1048
     phy: phy-can-transceiver: Drop the gpio desc check
     phy: phy-can-transceiver: Propagate return value of gpiod_set_value_cansleep
     phy: phy-can-transceiver: Add support for TJA105{1,7}

Any comments in the driver Patch [1-5]?

Thanks,
Peng

     arm64: dts: imx95-15x15-evk: Use phys to replace xceiver-supply
     arm64: dts: imx8mp-evk: Use phys to replace xceiver-supply
     arm64: dts: imx93-11x11-evk: Use phys to replace xceiver-supply

.../devicetree/bindings/phy/ti,tcan104x-can.yaml   |  69 +++++++-
arch/arm64/boot/dts/freescale/imx8mp-evk.dts       |  43 ++---
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts  |  17 +-
arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts  |  13 +-
drivers/phy/phy-can-transceiver.c                  | 180 ++++++++++++++++-----
5 files changed, 229 insertions(+), 93 deletions(-)
---
base-commit: da57e528a86120a1187edf3e2c9affb4083d342d
change-id: 20250821-can-c832cb4f0323

Best regards,
-- 
Peng Fan [off-list ref]