On 8/27/25 14:14, Kendall Willis wrote:

On 8/12/25 04:15, Markus Schneider-Pargmann wrote:

quoted

WKUP_EN is a flag to enable pin wakeup. Any activity will wakeup the SoC
in that case.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
  arch/arm64/boot/dts/ti/k3-pinctrl.h | 2 ++
  1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/ 

dts/ti/k3-pinctrl.h
index 
c0f09be8d3f94a70812b66c3f91626aac35f4026..d3b0ecdf1a4a4de25ee6121ec9e62d1c7df26eb9 100644

--- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h

@@ -19,6 +19,7 @@

  #define DS_OUT_VAL_SHIFT    (26)
  #define DS_PULLUD_EN_SHIFT    (27)
  #define DS_PULLTYPE_SEL_SHIFT    (28)
+#define WKUP_EN_SHIFT        (29)
  /* Schmitt trigger configuration */
  #define ST_DISABLE        (0 << ST_EN_SHIFT)

@@ -65,6 +66,7 @@

  #define PIN_DS_PULLUD_DISABLE        (1 << DS_PULLUD_EN_SHIFT)
  #define PIN_DS_PULL_DOWN        (0 << DS_PULLTYPE_SEL_SHIFT)
  #define PIN_DS_PULL_UP            (1 << DS_PULLTYPE_SEL_SHIFT)
+#define WKUP_EN                (1 << WKUP_EN_SHIFT)
  /* Default mux configuration for gpio-ranges to use with pinctrl */
  #define PIN_GPIO_RANGE_IOPAD    (PIN_INPUT | 7)

Reviewed-by: Kendall Willis <redacted>

FYI: A series by Akash [1] has been picked in linux-next. It includes 
the WKUP_EN macro but defined differently as PIN_WKUP_EN. The series 
needs to be rebased to account for that macro.

[1] https://lore.kernel.org/all/20250909044108.2541534-1-a-kaur@ti.com/ (local)

Best,
Kendall Willis