[PATCH v2 1/7] arm64: dts: ti: k3-pinctrl: Add WKUP_EN flag
From: Markus Schneider-Pargmann <msp@baylibre.com>
Date: 2025-08-12 09:16:33
Also in:
linux-devicetree, lkml
Subsystem:
arm/texas instruments k3 architecture, the rest · Maintainers:
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, Linus Torvalds
WKUP_EN is a flag to enable pin wakeup. Any activity will wakeup the SoC in that case. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> --- arch/arm64/boot/dts/ti/k3-pinctrl.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
index c0f09be8d3f94a70812b66c3f91626aac35f4026..d3b0ecdf1a4a4de25ee6121ec9e62d1c7df26eb9 100644
--- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h@@ -19,6 +19,7 @@ #define DS_OUT_VAL_SHIFT (26) #define DS_PULLUD_EN_SHIFT (27) #define DS_PULLTYPE_SEL_SHIFT (28) +#define WKUP_EN_SHIFT (29) /* Schmitt trigger configuration */ #define ST_DISABLE (0 << ST_EN_SHIFT)
@@ -65,6 +66,7 @@ #define PIN_DS_PULLUD_DISABLE (1 << DS_PULLUD_EN_SHIFT) #define PIN_DS_PULL_DOWN (0 << DS_PULLTYPE_SEL_SHIFT) #define PIN_DS_PULL_UP (1 << DS_PULLTYPE_SEL_SHIFT) +#define WKUP_EN (1 << WKUP_EN_SHIFT) /* Default mux configuration for gpio-ranges to use with pinctrl */ #define PIN_GPIO_RANGE_IOPAD (PIN_INPUT | 7)
--
2.50.1