[PATCH 23/25] dts: unisoc: rda8810pl: Add SDMMC controllers
From: Dang Huynh via B4 Relay <devnull+dang.huynh.mainlining.org@kernel.org>
Date: 2025-09-16 20:25:26
Also in:
b4-sent, dmaengine, linux-clk, linux-devicetree, linux-gpio, linux-hardening, linux-mmc, linux-pm, linux-rtc, lkml
Subsystem:
arm/rda micro architecture, the rest · Maintainers:
Manivannan Sadhasivam, Linus Torvalds
From: Dang Huynh <redacted> Add SDMMC1 and 2 controllers for the RDA8810PL platform. Signed-off-by: Dang Huynh <redacted> --- arch/arm/boot/dts/unisoc/rda8810pl.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/unisoc/rda8810pl.dtsi b/arch/arm/boot/dts/unisoc/rda8810pl.dtsi
index 4b3ae19e9da41ee9ffa76dd4fff01824c07ce045..e68f8330ce2c4750b6944612bee03b42694137e4 100644
--- a/arch/arm/boot/dts/unisoc/rda8810pl.dtsi
+++ b/arch/arm/boot/dts/unisoc/rda8810pl.dtsi@@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/rda,8810pl-apclk.h> +#include <dt-bindings/dma/rda-ifc.h> / { compatible = "rda,8810pl";
@@ -199,6 +200,30 @@ uart1: serial@0 { status = "disabled"; }; + mmc1: mmc@50000 { + compatible = "rda,8810pl-mmc"; + reg = <0x50000 0x1000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ap_syscon CLK_APB2>; + clock-names = "apb"; + resets = <&ap_syscon RST_APB2_SDMMC1>; + dmas = <&ifc IFC_SDMMC1_TX>, <&ifc IFC_SDMMC1_RX>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc2: mmc@60000 { + compatible = "rda,8810pl-mmc"; + reg = <0x60000 0x1000>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ap_syscon CLK_APB2>; + clock-names = "apb"; + resets = <&ap_syscon RST_APB2_SDMMC2>; + dmas = <&ifc IFC_SDMMC2_TX>, <&ifc IFC_SDMMC2_RX>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + uart2: serial@10000 { compatible = "rda,8810pl-uart"; reg = <0x10000 0x1000>;
--
2.51.0