Re: [PATCH 2/3] arm64: dts: ti: k3-am62p-j722s: enable the bxs-4-64
From: Nishanth Menon <nm@ti.com>
Date: 2025-08-13 18:42:51
Also in:
linux-devicetree, lkml
On 12:56-20250813, Randolph Sapp wrote: [...]
quoted
quoted
+ reg = <0x00 0x0fd80000 0x00 0x80000>; + clocks = <&k3_clks 237 1>; + clock-names = "core"; + assigned-clocks = <&k3_clks 237 1>; + assigned-clock-rates = <800000000>;
btw, as per https://www.ti.com/lit/ds/symlink/tda4aen-q1.pdf (page 86) 720MHz when vdd_core is 0.75v (default) and 800MHz when vdd_core is 0.85v 0.85v is set in the board dts and higher OPPs are enabled depending on board capability. You might want to check the assigned-clock-rates based on data sheet, default should'nt need a assigned-clock-rate. -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D https://ti.com/opensource