[PATCH 1/1] dt-bindings: mmc: mxs-mmc: change ref to mmc-controller-common.yaml from mmc-controller.yaml
From: Frank Li <Frank.Li@nxp.com>
Date: 2025-05-28 22:24:52
Also in:
imx, linux-devicetree, linux-mmc, lkml
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Change ref to mmc-controller-common.yaml from mmc-controller.yaml because imx23/imx28 use dual mode controller (spi and mmc). So default dts node name use spi instead of mmc. The legancy reason, it use difference compatible string to distringuish work mode (spi / mmc). Fix below CHECK_DTB warnings: arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dtb: spi@80010000 (fsl,imx23-mmc): $nodename:0: 'spi@80010000' does not match '^mmc(@.*)?$' Additional add clocks property. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- Documentation/devicetree/bindings/mmc/mxs-mmc.yaml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
index 32e512a68ed61..ca40ca92f858d 100644
--- a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml@@ -17,7 +17,7 @@ description: | and the properties used by the mxsmmc driver. allOf: - - $ref: mmc-controller.yaml + - $ref: mmc-controller-common.yaml# properties: compatible:
@@ -31,6 +31,9 @@ properties: interrupts: maxItems: 1 + clocks: + maxItems: 1 + dmas: maxItems: 1
--
2.34.1