Re: [PATCH 0/8] Add support for Amlogic S7/S7D/S6 pinctrl

On Wed, 14 May 2025 15:01:27 +0800, Xianwei Zhao wrote:

In some Amlogic SoCs, to save register space or due to some
abnormal arrangements, two sets of pins share one mux register.
A group starting from pin0 is the main pin group, which acquires
the register address through DTS and has management permissions,
but the register bit offset is undetermined.
Another GPIO group as a subordinate group. Some pins mux use share
register and bit offset from bit0 . But this group do not have
register management permissions.

In SoC S7 and S7D, GPIOX(16~19) mux share with GPIOCC mux register.

In SoC S6, GPIOX(16~19) mux share with GPIOCC mux register, and GPIOD(6)
mux share with GPIOF mux register.

Add S7/S7D/S6 pinctrl compatible string and device node.

Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
Xianwei Zhao (8):
      dt-bindings: pinctl: amlogic,pinctrl-a4: Add compatible string for S7
      dt-bindings: pinctl: amlogic,pinctrl-a4: Add compatible string for S7D
      dt-bindings: pinctl: amlogic,pinctrl-a4: Add compatible string for S6
      pinctrl: meson: a4: remove special data processing
      pinctrl: meson: support amlogic S6/S7/S7D SoC
      dts: arm64: amlogic: add S7 pinctrl node
      dts: arm64: amlogic: add S7D pinctrl node
      dts: arm64: amlogic: add S6 pinctrl node

 .../bindings/pinctrl/amlogic,pinctrl-a4.yaml       |   9 +-
 arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi        |  97 ++++++++++++++++++
 arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi        |  81 +++++++++++++++
 arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi       |  90 +++++++++++++++++
 drivers/pinctrl/meson/pinctrl-amlogic-a4.c         | 111 ++++++++++++++++-----
 5 files changed, 363 insertions(+), 25 deletions(-)
---
base-commit: aa94665adc28f3fdc3de2979ac1e98bae961d6ca
change-id: 20250514-s6-s7-pinctrl-af1ebda88a4e

Best regards,
--
Xianwei Zhao [off-list ref]

My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: using specified base-commit aa94665adc28f3fdc3de2979ac1e98bae961d6ca

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/amlogic/' for 20250514-s6-s7-pinctrl-v1-0-39d368cad250@amlogic.com:

arch/arm64/boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dtb: bus@fe000000 (simple-bus): pinctrl:ranges: [[0, 0, 0, 16384, 0, 832]] is not of type 'boolean'
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/amlogic/amlogic-s6-s905x5-bl209.dtb: bus@fe000000 (simple-bus): pinctrl:ranges: [[0, 0, 0, 16384, 0, 832]] is not of type 'boolean'
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm64/boot/dts/amlogic/amlogic-s7-s805x3-bp201.dtb: bus@fe000000 (simple-bus): pinctrl:ranges: [[0, 0, 0, 16384, 0, 832]] is not of type 'boolean'
	from schema $id: http://devicetree.org/schemas/simple-bus.yaml#