Re: [PATCH 0/5] Add J722S CSI support

On 19/02/25 00:24, Vaishnav Achath wrote:

This series adds support for CSI2RX capture on J722S EVM
and enables IMX219 and OV5640 overlays to enables
4 sensors on EVM, this provides a reference for a user to
enable a different sensor on any of the ports.

Test logs:
IMX219: https://gist.github.com/vaishnavachath/60cc2ef257601f27f28a315f8cf669c4
OV5640: https://gist.github.com/vaishnavachath/648202286d4d34d4d25f7c8c9db8b8bd

Vaishnav Achath (5):
   arm64: dts: ti: k3-j722s-main: Add BCDMA CSI overrides
   arm64: dts: ti: k3-j722s-main: Add CSI2RX nodes
   arm64: dts: ti: k3-j722s-evm: Add camera peripherals
   arm64: dts: ti: k3-j722s-evm: Add overlay for quad IMX219
   arm64: dts: ti: k3-j722s-evm: Add overlay for TEVI OV5640

For the series:
Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>

  arch/arm64/boot/dts/ti/Makefile               |   9 +
  ...k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtso | 304 +++++++++++++++++
  .../k3-j722s-evm-csi2-quad-tevi-ov5640.dtso   | 319 ++++++++++++++++++
  arch/arm64/boot/dts/ti/k3-j722s-evm.dts       |  28 ++
  arch/arm64/boot/dts/ti/k3-j722s-main.dtsi     | 193 +++++++++++
  5 files changed, 853 insertions(+)
  create mode 100644 arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtso
  create mode 100644 arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtso