Hi Lukasz,

On Wed, Feb 19, 2025 at 9:06 AM Krzysztof Kozlowski [off-list ref] wrote:

This defiine should not change. If you need to change it, means it is
not an ABI. Just like for other cases, I suggest to drop the define in
preparatory patch.

You can follow the same approach that was done for i.MX93.

Please check the two commits below:

commit c0813ce2e5b0d1174782aff30d366509377abc7b
Author: Pengfei Li [off-list ref]
Date:   Wed Oct 23 11:46:48 2024 -0700

    dt-bindings: clock: imx93: Drop IMX93_CLK_END macro definition

    IMX93_CLK_END should be dropped as it is not part of the ABI.

    Signed-off-by: Pengfei Li [off-list ref]
    Acked-by: Krzysztof Kozlowski [off-list ref]
    Acked-by: Peng Fan [off-list ref]
    Acked-by: Conor Dooley [off-list ref]
    Link: https://lore.kernel.org/r/20241023184651.381265-3-pengfei.li_1@nxp.com (local)
    Signed-off-by: Abel Vesa [off-list ref]


commit 0af18ba60752e8a4ba34404c1d9a4a799da690f5
Author: Pengfei Li [off-list ref]
Date:   Wed Oct 23 11:46:47 2024 -0700

    clk: imx93: Move IMX93_CLK_END macro to clk driver

    IMX93_CLK_END was previously defined in imx93-clock.h to indicate
    the number of clocks. However, it is not part of the ABI. For starters
    it does no really appear in DTS. But what's more important - new clocks
    are described later, which contradicts this define in binding header.
    So move this macro to clock driver.

    Signed-off-by: Pengfei Li [off-list ref]
    Reviewed-by: Abel Vesa [off-list ref]
    Link: https://lore.kernel.org/r/20241023184651.381265-2-pengfei.li_1@nxp.com (local)
    Signed-off-by: Abel Vesa [off-list ref]

Also, the Subject should not contain 'arm'. You could use:

clk: vf610: Add support for the Ethernet switch clock