Re: [PATCH 4/6] thermal: renesas: rzg3s: Add thermal driver for the Renesas RZ/G3S SoC
From: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Date: 2025-01-27 08:33:03
Also in:
linux-clk, linux-devicetree, linux-iio, linux-pm, linux-renesas-soc, lkml
On 25.01.2025 14:18, Jonathan Cameron wrote:
On Wed, 22 Jan 2025 11:29:19 +0100 Geert Uytterhoeven [off-list ref] wrote:quoted
Hi Claudiu, CC iio On Fri, Jan 3, 2025 at 5:38 PM Claudiu [off-list ref] wrote:quoted
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> The Renesas RZ/G3S SoC features a Thermal Sensor Unit (TSU) that reports the junction temperature. The temperature is reported through a dedicated ADC channel. Add a driver for the Renesas RZ/G3S TSU. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>Thanks for your patch!quoted
--- /dev/null +++ b/drivers/thermal/renesas/rzg3s_thermal.cquoted
+static int rzg3s_thermal_probe(struct platform_device *pdev) +{ + struct rzg3s_thermal_priv *priv; + struct device *dev = &pdev->dev; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + priv->channel = devm_iio_channel_get(dev, "tsu");Given there's only a single IIO channel, you could pass NULL instead of the name, and drop "io-channel-names" from the DT bindings. I don't know what's the IIO policy w.r.t. unnamed channels, though.It's supported, so fine as long as no future additional names show up. Will just fallback to index 0 I think.
If everyone agrees, I would keep the name, too, to avoid complications in case this IP variant will be extended on future SoCs. Thank you, Claudiu
Jonathanquoted
quoted
+ if (IS_ERR(priv->channel)) + return dev_err_probe(dev, PTR_ERR(priv->channel), "Failed to get IIO channel!\n"); + + priv->rstc = devm_reset_control_get_exclusive_deasserted(dev, NULL); + if (IS_ERR(priv->rstc)) + return dev_err_probe(dev, PTR_ERR(priv->rstc), "Failed to get reset!\n"); + + priv->dev = dev; + priv->mode = THERMAL_DEVICE_DISABLED; + platform_set_drvdata(pdev, priv); + + pm_runtime_set_autosuspend_delay(dev, 300); + pm_runtime_use_autosuspend(dev); + pm_runtime_enable(dev); + + ret = rzg3s_thermal_read_calib(priv); + if (ret) { + dev_err_probe(dev, ret, "Failed to read calibration data!\n"); + goto rpm_disable; + } + + priv->tz = thermal_of_zone_register(dev->of_node, 0, priv, &rzg3s_tz_of_ops); + if (IS_ERR(priv->tz)) { + dev_err_probe(dev, PTR_ERR(priv->tz), "Failed to register thermal zone!\n"); + goto rpm_disable; + } + + ret = thermal_add_hwmon_sysfs(priv->tz); + if (ret) { + dev_err_probe(dev, ret, "Failed to add hwmon sysfs!\n"); + goto tz_unregister; + } + + return 0; + +tz_unregister: + thermal_of_zone_unregister(priv->tz); +rpm_disable: + pm_runtime_disable(dev); + pm_runtime_dont_use_autosuspend(dev); + return ret; +}Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds