Re: [PATCH v3 2/3] mailbox: add samsung exynos driver

On Thu, Dec 05, 2024 at 05:41:36PM +0000, Tudor Ambarus wrote:

The samsung exynos mailbox controller has 16 flag bits for hardware

Here, subject and other text/descriptions:
s/samsung/Samsung/
s/exynos/Exynos/

interrupt generation and a shared register for passing mailbox messages.
When the controller is used by the ACPM protocol the shared register is
ignored and the mailbox controller acts as a doorbell. The controller
just raises the interrupt to APM after the ACPM protocol has written
the message to SRAM.

...

+static int exynos_mbox_send_data(struct mbox_chan *chan, void *data)
+{
+	struct exynos_mbox *exynos_mbox = dev_get_drvdata(chan->mbox->dev);
+	int index;
+
+	index = exynos_mbox_chan_index(chan);
+	if (index < 0)
+		return index;
+
+	writel_relaxed(BIT(index), exynos_mbox->regs + EXYNOS_MBOX_INTGR1);

writel()

+
+	return 0;
+}
+
+static const struct mbox_chan_ops exynos_mbox_chan_ops = {
+	.send_data = exynos_mbox_send_data,
+};
+
+static const struct of_device_id exynos_mbox_match[] = {
+	{ .compatible = "google,gs101-acpm-mbox" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, exynos_mbox_match);
+
+static int exynos_mbox_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct exynos_mbox *exynos_mbox;
+	struct mbox_controller *mbox;
+	struct mbox_chan *chans;
+	int i;
+
+	exynos_mbox = devm_kzalloc(dev, sizeof(*exynos_mbox), GFP_KERNEL);
+	if (!exynos_mbox)
+		return -ENOMEM;
+
+	mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	chans = devm_kcalloc(dev, EXYNOS_MBOX_CHAN_COUNT, sizeof(*chans),
+			     GFP_KERNEL);
+	if (!chans)
+		return -ENOMEM;
+
+	exynos_mbox->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(exynos_mbox->regs))
+		return PTR_ERR(exynos_mbox->regs);
+
+	exynos_mbox->pclk = devm_clk_get_enabled(dev, "pclk");
+	if (IS_ERR(exynos_mbox->pclk))
+		return dev_err_probe(dev, PTR_ERR(exynos_mbox->pclk),
+				     "Failed to enable clock.\n");
+
+	mbox->num_chans = EXYNOS_MBOX_CHAN_COUNT;
+	mbox->chans = chans;
+	mbox->dev = dev;
+	mbox->ops = &exynos_mbox_chan_ops;
+
+	for (i = 0; i < EXYNOS_MBOX_CHAN_COUNT; i++)
+		chans[i].mbox = mbox;
+
+	exynos_mbox->dev = dev;
+	exynos_mbox->mbox = mbox;
+
+	platform_set_drvdata(pdev, exynos_mbox);
+
+	/* Mask out all interrupts. We support just polling channels for now. */
+	writel_relaxed(EXYNOS_MBOX_INTMR0_MASK,

writel()

+		       exynos_mbox->regs + EXYNOS_MBOX_INTMR0);
+
+	return devm_mbox_controller_register(dev, mbox);
+}
+
+static struct platform_driver exynos_mbox_driver = {
+	.probe	= exynos_mbox_probe,
+	.driver	= {
+		.name = "exynos-acpm-mbox",
+		.of_match_table	= of_match_ptr(exynos_mbox_match),

Drop of_match_ptr() - unused symbol warnings.

Best regards,
Krzysztof