Thread (23 messages) 23 messages, 7 authors, 2024-12-20

Re: [PATCH v6 4/7] pinctrl: s32: convert the driver into an mfd cell

From: Krzysztof Kozlowski <krzk@kernel.org>
Date: 2024-11-19 09:26:17
Also in: imx, linux-devicetree, linux-gpio, lkml

On 13/11/2024 11:10, Andrei Stefanescu wrote:
quoted hunk ↗ jump to hunk
 
-static inline void s32_pin_set_pull(enum pin_config_param param,
-				   unsigned int *mask, unsigned int *config)
+static void s32_pin_set_pull(enum pin_config_param param,
+			     unsigned int *mask, unsigned int *config)
 {
 	switch (param) {
 	case PIN_CONFIG_BIAS_DISABLE:
@@ -762,15 +757,15 @@ static int s32_pinctrl_parse_groups(struct device_node *np,
 	grp->data.name = np->name;
 
 	npins = of_property_count_elems_of_size(np, "pinmux", sizeof(u32));
-	if (npins < 0) {
-		dev_err(dev, "Failed to read 'pinmux' property in node %s.\n",
-			grp->data.name);
-		return -EINVAL;
-	}
-	if (!npins) {
-		dev_err(dev, "The group %s has no pins.\n", grp->data.name);
-		return -EINVAL;
-	}
+	if (npins < 0)
+		return dev_err_probe(dev, -EINVAL,
+				     "Failed to read 'pinmux' in node %s\n",
+				     grp->data.name);
I do not see how this change is related. Looks you are mixing cleanups
with refactoring into MFD cell. These are two different things.
quoted hunk ↗ jump to hunk
+
+	if (!npins)
+		return dev_err_probe(dev, -EINVAL,
+				     "The group %s has no pins\n",
+				     grp->data.name);
 
 	grp->data.npins = npins;
 
@@ -811,11 +806,9 @@ static int s32_pinctrl_parse_functions(struct device_node *np,
 	/* Initialise function */
 	func->name = np->name;
 	func->ngroups = of_get_child_count(np);
-	if (func->ngroups == 0) {
-		dev_err(info->dev, "no groups defined in %pOF\n", np);
-		return -EINVAL;
-	}
-
+	if (func->ngroups == 0)
+		return dev_err_probe(info->dev, -EINVAL,
+				     "No groups defined in %pOF\n", np);
 	groups = devm_kcalloc(info->dev, func->ngroups,
 				    sizeof(*func->groups), GFP_KERNEL);
 	if (!groups)
@@ -838,57 +831,42 @@ static int s32_pinctrl_parse_functions(struct device_node *np,
 static int s32_pinctrl_probe_dt(struct platform_device *pdev,
 				struct s32_pinctrl *ipctl)
 {
+	struct nxp_siul2_mfd *mfd = dev_get_drvdata(pdev->dev.parent);
 	struct s32_pinctrl_soc_info *info = ipctl->info;
-	struct device_node *np = pdev->dev.of_node;
-	struct resource *res;
-	struct regmap *map;
-	void __iomem *base;
-	unsigned int mem_regions = info->soc_data->mem_regions;
+	unsigned int mem_regions;
+	struct device_node *np;
+	u32 nfuncs = 0, i = 0, j;
+	u8 regmap_type;
 	int ret;
-	u32 nfuncs = 0;
-	u32 i = 0;
 
+	np = pdev->dev.parent->of_node;
 	if (!np)
 		return -ENODEV;
 
-	if (mem_regions == 0 || mem_regions >= 10000) {
-		dev_err(&pdev->dev, "mem_regions is invalid: %u\n", mem_regions);
-		return -EINVAL;
-	}
+	/* one MSCR and one IMCR region per SIUL2 module */
How is this related to converion into MFD cell?

Still looks like an ABI break.


Best regards,
Krzysztof

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help