On 2024/9/6 11:50, Chukun Pan wrote:

Hi Junhao,

quoted

I have tried rgmii-id with tx_delay/rx_delay 0x38/0x15, or 0x0/0x0,
or directly removed tx_delay/rx_delay, they all didn't transmit data.

I saw in dwmac-rk.c that when using rgmii-id, the tx_delay/rx_delay
properties in dt are ignored?

When using rgmii-id mode, tx_delay and rx_delay can be removed directly.
But you need to test whether the rx/tx-internal-delay-ps is appropriate.

When tx_delay and rx_delay are removed, the driver prints some errors in kmsg.
Maybe we need to modify the driver?

Lines 1657 and 1668 of drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c:
 rk_gmac-dwmac fe010000.ethernet: Can not read property: tx_delay.
 rk_gmac-dwmac fe010000.ethernet: set tx_delay to 0x30
 rk_gmac-dwmac fe010000.ethernet: Can not read property: rx_delay.
 rk_gmac-dwmac fe010000.ethernet: set rx_delay to 0x10

After testing, rx/tx-internal-delay-ps 1500 seems stable:
$ ping 192.168.0.224
64 bytes from 192.168.0.224: icmp_seq=0 ttl=64 time=1.256 ms
64 bytes from 192.168.0.224: icmp_seq=1 ttl=64 time=1.146 ms
...
$ iperf3 -t 60 -c 192.168.0.224
Connecting to host 192.168.0.224, port 5201
[  4] local 192.168.0.101 port 59565 connected to 192.168.0.224 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec   114 MBytes   956 Mbits/sec
...
[  4]  59.00-60.00  sec   112 MBytes   942 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-60.00  sec  6.58 GBytes   942 Mbits/sec                  sender
[  4]   0.00-60.00  sec  6.58 GBytes   942 Mbits/sec                  receiver

Best regards,
Junhao