[PATCH 1/3] dt-bindings: clk: at91: Add clock IDs for the slow clock controller
From: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Date: 2024-08-26 17:31:23
Also in:
linux-clk, linux-devicetree, lkml
Subsystem:
common clk framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add clock IDs for the slow clock controller. Previously, raw numbers were used (0 or 1) for clocks generated by the slow clock controller. This leads to confusion and wrong IDs were used on few device trees. To avoid this add macros. Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> --- include/dt-bindings/clock/at91.h | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/include/dt-bindings/clock/at91.h b/include/dt-bindings/clock/at91.h
index 6ede88c3992d..99f4767ff6bb 100644
--- a/include/dt-bindings/clock/at91.h
+++ b/include/dt-bindings/clock/at91.h@@ -55,4 +55,8 @@ #define AT91_PMC_GCKRDY 24 /* Generated Clocks */ #endif +/* Slow clock. */ +#define SCKC_MD_SLCK 0 +#define SCKC_TD_SLCK 1 + #endif
--
2.39.2