On Wed, Jul 17, 2024 at 2:51 AM Krzysztof Kozlowski [off-list ref] wrote:

On 16/07/2024 23:31, Jim Quinlan wrote:

quoted

o Change order of the compatible strings to be alphabetical

o Describe resets/reset-names before using them in rules

<form letter>
This is a friendly reminder during the review process.

It seems my or other reviewer's previous comments were not fully
addressed. Maybe the feedback got lost between the quotes, maybe you
just forgot to apply it. Please go back to the previous discussion and
either implement all requested changes or keep discussing them.

Thank you.
</form letter>

I'm sorry Krzysztof, but AFAICT I paid attention to all of your comments and
tried to answer them as best as I could.  Please do not resort to a
form letter; if
you think I missed something(s) please oblige me and say what it is rather than
having  me search for something that you know and I do not.

quoted

o Add minItems/maxItems where needed.

o Change maintainer: Nicolas has not been active for a while.  It also
  makes sense for a Broadcom employee to be the maintainer as many of the
  details are privy to Broadcom.

Signed-off-by: Jim Quinlan <redacted>
---
 .../bindings/pci/brcm,stb-pcie.yaml           | 26 ++++++++++++++-----
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 11f8ea33240c..692f7ed7c98e 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Brcmstb PCIe Host Controller

 maintainers:
-  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+  - Jim Quinlan <james.quinlan@broadcom.com>

 properties:
   compatible:

@@ -16,11 +16,11 @@ properties:
           - brcm,bcm2711-pcie # The Raspberry Pi 4
           - brcm,bcm4908-pcie
           - brcm,bcm7211-pcie # Broadcom STB version of RPi4
-          - brcm,bcm7278-pcie # Broadcom 7278 Arm
           - brcm,bcm7216-pcie # Broadcom 7216 Arm
-          - brcm,bcm7445-pcie # Broadcom 7445 Arm
+          - brcm,bcm7278-pcie # Broadcom 7278 Arm
           - brcm,bcm7425-pcie # Broadcom 7425 MIPs
           - brcm,bcm7435-pcie # Broadcom 7435 MIPs
+          - brcm,bcm7445-pcie # Broadcom 7445 Arm

   reg:
     maxItems: 1

@@ -95,6 +95,18 @@ properties:
       minItems: 1
       maxItems: 3

+  resets:
+    minItems: 1
+    items:
+      - description: reset for external PCIe PERST# signal # perst
+      - description: reset for phy reset calibration       # rescal
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: perst
+      - const: rescal

There are no devices with two resets. Anyway, this does not match one of
your variants which have first element as rescal.

The 4908 chip exclusively uses the "perst" reset, and the  7216 chip
exclusively uses the "rescal" reset.   The rest of the chips use zero
resets.   All together, there are two resets.

You are the one that wanted me to first list all resets at the top,
and refer to them by the conditional rules.

What am I missing here?

Regards,
Jim Quinlan
Broadcom STB/CM

Best regards,
Krzysztof