[PATCH v3 05/12] PCI: brcmstb: Use swinit reset if available
From: Jim Quinlan <hidden>
Date: 2024-07-10 22:16:43
Also in:
linux-pci, lkml
Subsystem:
broadcom bcm2711/bcm2835 arm architecture, broadcom bcm7xxx arm architecture, broadcom stb pcie driver, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Florian Fainelli, Jim Quinlan, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
The 7712 SOC adds a software init reset device for the PCIe HW. If found in the DT node, use it. Signed-off-by: Jim Quinlan <redacted> --- drivers/pci/controller/pcie-brcmstb.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 92816d8d215a..4dc2ff7f3167 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c@@ -266,6 +266,7 @@ struct brcm_pcie { struct reset_control *rescal; struct reset_control *perst_reset; struct reset_control *bridge; + struct reset_control *swinit; int num_memc; u64 memc_size[PCIE_BRCM_MAX_MEMC]; u32 hw_rev;
@@ -1633,12 +1634,27 @@ static int brcm_pcie_probe(struct platform_device *pdev) if (IS_ERR(pcie->bridge)) return PTR_ERR(pcie->bridge); + pcie->swinit = devm_reset_control_get_optional_exclusive(&pdev->dev, "swinit"); + if (IS_ERR(pcie->swinit)) + return PTR_ERR(pcie->swinit); + ret = clk_prepare_enable(pcie->clk); if (ret) { dev_err(&pdev->dev, "could not enable clock\n"); return ret; } + ret = reset_control_assert(pcie->swinit); + if (ret) { + dev_err_probe(&pdev->dev, ret, "could not assert reset 'swinit'\n"); + goto clk_out; + } + ret = reset_control_deassert(pcie->swinit); + if (ret) { + dev_err(&pdev->dev, "could not de-assert reset 'swinit' after asserting\n"); + goto clk_out; + } + ret = reset_control_reset(pcie->rescal); if (ret) { dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
--
2.17.1
Attachments
- smime.p7s [application/pkcs7-signature] 4210 bytes