Re: [PATCH] dt-bindings: ata: atmel: remove at91 compact flash documentation
From: Nicolas Ferre <nicolas.ferre@microchip.com>
Date: 2024-02-05 12:51:19
Also in:
linux-devicetree, linux-ide, lkml
On 05/02/2024 at 11:52, Hari Prasath G E - I63539 wrote:
The compatible "at91rm9200-cf" is not used by any driver,hence remove the corresponding documentation. Signed-off-by: Hari Prasath Gujulan Elango <redacted>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
quoted hunk ↗ jump to hunk
--- .../devicetree/bindings/ata/atmel-at91_cf.txt | 19 ------------------- 1 file changed, 19 deletions(-) delete mode 100644 Documentation/devicetree/bindings/ata/atmel-at91_cf.txtdiff --git a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt b/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt deleted file mode 100644 index c1d22b3ae134..000000000000 --- a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt +++ /dev/null@@ -1,19 +0,0 @@ -Atmel AT91RM9200 CompactFlash - -Required properties: -- compatible : "atmel,at91rm9200-cf". -- reg : should specify localbus address and size used. -- gpios : specifies the gpio pins to control the CF device. Detect - and reset gpio's are mandatory while irq and vcc gpio's are - optional and may be set to 0 if not present. - -Example: -compact-flash@50000000 { - compatible = "atmel,at91rm9200-cf"; - reg = <0x50000000 0x30000000>; - gpios = <&pioC 13 0 /* irq */ - &pioC 15 0 /* detect */ - 0 /* vcc */ - &pioC 5 0 /* reset */ - >; -};
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel