[PATCH] dt-bindings: ata: atmel: remove at91 compact flash documentation
From: Hari Prasath Gujulan Elango <hidden>
Date: 2024-02-05 10:52:48
Also in:
linux-devicetree, linux-ide, lkml
Subsystem:
libata subsystem (serial and parallel ata drivers), open firmware and flattened device tree bindings, the rest · Maintainers:
Damien Le Moal, Niklas Cassel, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The compatible "at91rm9200-cf" is not used by any driver,hence remove the corresponding documentation. Signed-off-by: Hari Prasath Gujulan Elango <redacted> --- .../devicetree/bindings/ata/atmel-at91_cf.txt | 19 ------------------- 1 file changed, 19 deletions(-) delete mode 100644 Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
diff --git a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt b/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
deleted file mode 100644
index c1d22b3ae134..000000000000
--- a/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
+++ /dev/null@@ -1,19 +0,0 @@ -Atmel AT91RM9200 CompactFlash - -Required properties: -- compatible : "atmel,at91rm9200-cf". -- reg : should specify localbus address and size used. -- gpios : specifies the gpio pins to control the CF device. Detect - and reset gpio's are mandatory while irq and vcc gpio's are - optional and may be set to 0 if not present. - -Example: -compact-flash@50000000 { - compatible = "atmel,at91rm9200-cf"; - reg = <0x50000000 0x30000000>; - gpios = <&pioC 13 0 /* irq */ - &pioC 15 0 /* detect */ - 0 /* vcc */ - &pioC 5 0 /* reset */ - >; -};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel