[PATCH 02/18] tty: serial: samsung: set UPIO_MEM32 iotype for gs101
From: Tudor Ambarus <tudor.ambarus@linaro.org>
Date: 2024-01-10 10:21:10
Also in:
linux-samsung-soc, linux-serial, lkml
Subsystem:
arm/samsung s3c, s5p and exynos arm architectures, the rest, tty layer and serial drivers · Maintainers:
Krzysztof Kozlowski, Peter Griffin, Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
GS101's Connectivity Peripheral blocks (peric0/1 blocks) which include the I3C and USI (I2C, SPI, UART) only allow 32-bit register accesses. Instead of specifying the reg-io-width = 4 everywhere, for each node, the requirement should be deduced from the compatible. Infer UPIO_MEM32 iotype from the "google,gs101-uart" compatible. Update the uart info name to be GS101 specific in order to differentiate from the other exynos platforms. All the other settings are not changed. exynos_fifoszdt_serial_drv_data was replaced by gs101_serial_drv_data because the iotype restriction is gs101 specific and there was no other user of exynos_fifoszdt_serial_drv_data. Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Krzysztof Kozlowski <redacted> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> --- drivers/tty/serial/samsung_tty.c | 38 +++++++++++++++++++++++--------- 1 file changed, 28 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index b8fe9df20202..20ec6ef1a52f 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c@@ -2495,25 +2495,43 @@ static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data = { .fifosize = { 256, 64, 64, 64 }, }; -/* - * Common drv_data struct for platforms that specify samsung,uart-fifosize in - * device tree. - */ -static const struct s3c24xx_serial_drv_data exynos_fifoszdt_serial_drv_data = { - EXYNOS_COMMON_SERIAL_DRV_DATA(), +static const struct s3c24xx_serial_drv_data gs101_serial_drv_data = { + .info = { + .name = "Google GS101 UART", + .type = TYPE_S3C6400, + .port_type = PORT_S3C6400, + .iotype = UPIO_MEM32, + .has_divslot = 1, + .rx_fifomask = S5PV210_UFSTAT_RXMASK, + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, + .rx_fifofull = S5PV210_UFSTAT_RXFULL, + .tx_fifofull = S5PV210_UFSTAT_TXFULL, + .tx_fifomask = S5PV210_UFSTAT_TXMASK, + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 1, + .clksel_mask = 0, + .clksel_shift = 0, + }, + .def_cfg = { + .ucon = S5PV210_UCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + .has_fracval = 1, + }, + /* samsung,uart-fifosize must be specified in the device tree. */ .fifosize = { 0 }, }; #define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data) #define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data) #define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data) -#define EXYNOS_FIFOSZDT_DRV_DATA (&exynos_fifoszdt_serial_drv_data) +#define GS101_SERIAL_DRV_DATA (&gs101_serial_drv_data) #else #define EXYNOS4210_SERIAL_DRV_DATA NULL #define EXYNOS5433_SERIAL_DRV_DATA NULL #define EXYNOS850_SERIAL_DRV_DATA NULL -#define EXYNOS_FIFOSZDT_DRV_DATA NULL +#define GS101_SERIAL_DRV_DATA NULL #endif #ifdef CONFIG_ARCH_APPLE
@@ -2601,7 +2619,7 @@ static const struct platform_device_id s3c24xx_serial_driver_ids[] = { .driver_data = (kernel_ulong_t)ARTPEC8_SERIAL_DRV_DATA, }, { .name = "gs101-uart", - .driver_data = (kernel_ulong_t)EXYNOS_FIFOSZDT_DRV_DATA, + .driver_data = (kernel_ulong_t)GS101_SERIAL_DRV_DATA, }, { }, };
@@ -2624,7 +2642,7 @@ static const struct of_device_id s3c24xx_uart_dt_match[] = { { .compatible = "axis,artpec8-uart", .data = ARTPEC8_SERIAL_DRV_DATA }, { .compatible = "google,gs101-uart", - .data = EXYNOS_FIFOSZDT_DRV_DATA }, + .data = GS101_SERIAL_DRV_DATA }, {}, }; MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
--
2.43.0.472.g3155946c3a-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel