Provide dt-schema documentation for Google gs101 SoC clock controller.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
 .../bindings/clock/google,gs101-clock.yaml    | 109 ++++++++++++++++++
 1 file changed, 109 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/google,gs101-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
new file mode 100644
index 000000000000..a28d05d88afe
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml

@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/google,gs101-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google GS101 SoC clock controller
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+  Google GS101 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that clock tree
+  is OSCCLK (24.576 MHz). That external clock must be defined as a fixed-rate
+  clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/gs101.h' header.
+
+properties:
+  compatible:
+    enum:
+      - google,gs101-cmu-top
+      - google,gs101-cmu-apm
+      - google,gs101-cmu-misc
+
+  clocks:
+    minItems: 1
+    maxItems: 5