[PATCH v2 20/28] dt-bindings: pinctrl: renesas: document RZ/G3S SoC
From: Claudiu <claudiu.beznea@tuxon.dev>
Date: 2023-09-29 05:42:19
Also in:
linux-clk, linux-devicetree, linux-gpio, linux-renesas-soc, linux-serial, lkml
Subsystem:
open firmware and flattened device tree bindings, pin control subsystem, pin controller - renesas, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Geert Uytterhoeven, Linus Torvalds
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Add documentation for pin controller found on RZ/G3S (R9A08G045) SoC.
Compared with RZ/G2{L,UL} RZ/G3S has 82 general-purpose IOs, no slew
rate and output impedance support and more values for drive strength
which needs to be expressed in microamp.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
Changes in v2:
- defined drive-strength-microamp as general and make if/then schema to
not allow specific properties depending on compatible
.../pinctrl/renesas,rzg2l-pinctrl.yaml | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index eb726770f571..86228ba69aab 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml@@ -25,6 +25,7 @@ properties: - enum: - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five - renesas,r9a07g044-pinctrl # RZ/G2{L,LC} + - renesas,r9a08g045-pinctrl # RZ/G3S - items: - enum:
@@ -78,6 +79,21 @@ additionalProperties: - $ref: pincfg-node.yaml# - $ref: pinmux-node.yaml# + - if: + properties: + compatible: + contains: + enum: + - renesas,r9a08g045-pinctrl + then: + properties: + drive-strength: false + output-impedance-ohms: false + slew-rate: false + else: + properties: + drive-strength-microamp: false + description: Pin controller client devices use pin configuration subnodes (children and grandchildren) for desired pin configuration.
@@ -92,6 +108,10 @@ additionalProperties: pins: true drive-strength: enum: [ 2, 4, 8, 12 ] + drive-strength-microamp: + enum: [ 1900, 2200, 4000, 4400, 4500, 4700, 5200, 5300, 5700, + 5800, 6000, 6050, 6100, 6550, 6800, 7000, 8000, 9000, + 10000 ] output-impedance-ohms: enum: [ 33, 50, 66, 100 ] power-source:
--
2.39.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel