Thread (8 messages) 8 messages, 3 authors, 2023-08-09

Re: [PATCH v7 2/2] ARM: dts: aspeed: yosemitev4: add Facebook Yosemite 4 BMC

From: Joel Stanley <joel@jms.id.au>
Date: 2023-08-09 08:16:12
Also in: linux-aspeed, linux-devicetree, lkml

On Wed, 9 Aug 2023 at 08:12, Joel Stanley [off-list ref] wrote:
On Wed, 9 Aug 2023 at 08:05, Joel Stanley [off-list ref] wrote:
quoted
On Tue, 8 Aug 2023 at 08:43, Delphine CC Chiu
[off-list ref] wrote:
quoted
Add linux device tree entry related to
Yosemite 4 specific devices connected to BMC SoC.
There were also some of these annoying warnings. Please try to fix
them up in your next version:

../arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts:460.4-14:
Warning (reg_format):
/ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@71/i2c@0:reg: property has
invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)@@ -450,6 +450,9 @@ eeprom@51 {
This silenced most of them:

        i2c-mux@71 {
                compatible = "nxp,pca9846";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
                idle-state = <0>;
                i2c-mux-idle-disconnect;
                reg = <0x71>;
@@ -557,6 +560,9 @@ gpio@61 {

        i2c-mux@73 {
                compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
                idle-state = <0>;
                i2c-mux-idle-disconnect;
                reg = <0x73>;
And then this fixed the remaining one:
@@ -423,7 +423,7 @@ power-sensor@42 {
                reg = <0x42>;
        };

-       power-sensor@41 {
+       power-sensor@43 {
                compatible = "ti,ina230";
                reg = <0x43>;
        };

Please fold in these changes in your next version.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help