Hi Ganapatrao,

On Wed, 28 Jun 2023 07:45:55 +0100,
Ganapatrao Kulkarni [off-list ref] wrote:

Hi Marc,


On 15-05-2023 11:00 pm, Marc Zyngier wrote:

quoted

This is the 4th drop of NV support on arm64 for this year.

For the previous episodes, see [1].

What's changed:

- New framework to track system register traps that are reinjected in
   guest EL2. It is expected to replace the discrete handling we have
   enjoyed so far, which didn't scale at all. This has already fixed a
   number of bugs that were hidden (a bunch of traps were never
   forwarded...). Still a work in progress, but this is going in the
   right direction.

- Allow the L1 hypervisor to have a S2 that has an input larger than
   the L0 IPA space. This fixes a number of subtle issues, depending on
   how the initial guest was created.

- Consequently, the patch series has gone longer again. Boo. But
   hopefully some of it is easier to review...

I am facing issue in booting NestedVM with V9 as well with 10 patchset.

I have tried V9/V10 on Ampere platform using kvmtool and I could boot
Guest-Hypervisor and then NestedVM without any issue.
However when I try to boot using QEMU(not using EDK2/EFI),
Guest-Hypervisor is booted with Fedora 37 using virtio disk. From
Guest-Hypervisor console(or ssh shell), If I try to boot NestedVM,
boot hangs very early stage of the boot.

I did some debug using ftrace and it seems the Guest-Hypervisor is
getting very high rate of arch-timer interrupts,
due to that all CPU time is going on in serving the Guest-Hypervisor
and it is never going back to NestedVM.

I am using QEMU vanilla version v7.2.0 with top-up patches for NV [1]

So I went ahead and gave QEMU a go. On my systems, *nothing* works (I
cannot even boot a L1 with 'virtualization=on" (the guest is stuck at
the point where virtio gets probed and waits for its first interrupt).

Worse, booting a hVHE guest results in QEMU generating an assert as it
tries to inject an interrupt using the QEMU GICv3 model, something
that should *NEVER* be in use with KVM.

With help from Eric, I got to a point where the hVHE guest could boot
as long as I kept injecting console interrupts, which is again a
symptom of the vGIC not being used.

So something is *majorly* wrong with the QEMU patches. I don't know
what makes it possible for you to even boot the L1 - if the GIC is
external, injecting an interrupt in the L2 is simply impossible.

Miguel, can you please investigate this?

In the meantime, I'll add some code to the kernel side to refuse the
external interrupt controller configuration with NV. Hopefully that
will lead to some clues about what is going on.

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel