Re: [PATCH 2/9] regulator: dt-bindings: mt6358: Drop *_sshub regulators
From: Matthias Brugger <matthias.bgg@gmail.com>
Date: 2023-06-09 15:47:39
Also in:
linux-devicetree, lkml
On 09/06/2023 10:29, Chen-Yu Tsai wrote:
The *_sshub regulators are actually alternate configuration interfaces for their non *_sshub counterparts. They are not separate regulator outputs. These registers are intended for the companion processor to use to configure the power rails while the main processor is sleeping. They are not intended for the main operating system to use. Since they are not real outputs they shouldn't be modeled separately. Remove them. Luckily no device tree actually uses them. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
quoted hunk ↗ jump to hunk
--- .../bindings/regulator/mt6358-regulator.txt | 22 +++++-------------- 1 file changed, 5 insertions(+), 17 deletions(-)diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt index b22b956d1cbe..b6384306db5c 100644 --- a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt@@ -8,14 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt. The valid names for regulators are:: BUCK: - buck_vdram1, buck_vcore, buck_vcore_sshub, buck_vpa, buck_vproc11, - buck_vproc12, buck_vgpu, buck_vs2, buck_vmodem, buck_vs1 + buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu, + buck_vs2, buck_vmodem, buck_vs1 LDO: ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio, ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others, - ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, - ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, - ldo_vrf18, ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2 + ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28, + ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18, + ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2 Example:@@ -346,17 +346,5 @@ Example: regulator-max-microvolt = <3100000>; regulator-enable-ramp-delay = <540>; }; - - mt6358_vcore_sshub_reg: buck_vcore_sshub { - regulator-name = "vcore_sshub"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - }; - - mt6358_vsram_others_sshub_reg: ldo_vsram_others_sshub { - regulator-name = "vsram_others_sshub"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - }; }; };
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel