[PATCH 2/9] regulator: dt-bindings: mt6358: Drop *_sshub regulators
From: Chen-Yu Tsai <wenst@chromium.org>
Date: 2023-06-09 08:32:41
Also in:
linux-devicetree, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, voltage and current regulator framework · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Liam Girdwood, Mark Brown
The *_sshub regulators are actually alternate configuration interfaces for their non *_sshub counterparts. They are not separate regulator outputs. These registers are intended for the companion processor to use to configure the power rails while the main processor is sleeping. They are not intended for the main operating system to use. Since they are not real outputs they shouldn't be modeled separately. Remove them. Luckily no device tree actually uses them. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> --- .../bindings/regulator/mt6358-regulator.txt | 22 +++++-------------- 1 file changed, 5 insertions(+), 17 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
index b22b956d1cbe..b6384306db5c 100644
--- a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt@@ -8,14 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt. The valid names for regulators are:: BUCK: - buck_vdram1, buck_vcore, buck_vcore_sshub, buck_vpa, buck_vproc11, - buck_vproc12, buck_vgpu, buck_vs2, buck_vmodem, buck_vs1 + buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu, + buck_vs2, buck_vmodem, buck_vs1 LDO: ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio, ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others, - ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, - ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, - ldo_vrf18, ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2 + ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28, + ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18, + ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2 Example:
@@ -346,17 +346,5 @@ Example: regulator-max-microvolt = <3100000>; regulator-enable-ramp-delay = <540>; }; - - mt6358_vcore_sshub_reg: buck_vcore_sshub { - regulator-name = "vcore_sshub"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - }; - - mt6358_vsram_others_sshub_reg: ldo_vsram_others_sshub { - regulator-name = "vsram_others_sshub"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1293750>; - }; }; };
--
2.41.0.162.gfafddb0af9-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel