Enable SAI3 on i.MX8MP EVK, add WM8960 codec binding and regulator.
This is all that is needed to get analog audio output operational
on i.MX8MP EVK.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Abel Vesa <abelvesa@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Jacky Bai <ping.bai@nxp.com>
Cc: Krzysztof Kozlowski <redacted>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Marco Felsch <redacted>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: NXP Linux Team <redacted>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
---
V2: No change
V3: No change
V4: - Update codec node name and phandle label
    - Use just sound for the sound node name
    - Rebase on next 20230223
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 60 ++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 7816853162b3f..9ed94f271ef9a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts

@@ -40,6 +40,16 @@ pcie0_refclk: pcie0-refclk {
 		clock-frequency = <100000000>;
 	};
 
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
 	reg_can1_stby: regulator-can1-stby {
 		compatible = "regulator-fixed";
 		regulator-name = "can1-stby";

@@ -83,6 +93,23 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	sound {
+		compatible = "fsl,imx-audio-wm8960";