[PATCH RFC 3/4] arm64: dts: apple: t8103: Add touchbar bindings
From: Sasha Finkelstein via B4 Relay <devnull+fnkl.kernel.gmail.com@kernel.org>
Date: 2023-02-24 10:20:28
Also in:
asahi, b4-sent, linux-devicetree, linux-input, lkml
Subsystem:
arm/apple machine support, the rest · Maintainers:
Sven Peter, Janne Grunau, Linus Torvalds
From: Sasha Finkelstein <redacted> Adds device tree entries for the touchbar digitizer Signed-off-by: Sasha Finkelstein <redacted> --- arch/arm64/boot/dts/apple/t8103-j293.dts | 20 ++++++++++++++++++++ arch/arm64/boot/dts/apple/t8103.dtsi | 12 ++++++++++++ 2 files changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts
index 151074109a11..c369493b1c06 100644
--- a/arch/arm64/boot/dts/apple/t8103-j293.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j293.dts@@ -15,6 +15,9 @@ / { compatible = "apple,j293", "apple,t8103", "apple,arm-platform"; model = "Apple MacBook Pro (13-inch, M1, 2020)"; + aliases { + touchbar0 = &touchbar0; + }; }; &bluetooth0 {
@@ -25,6 +28,23 @@ &wifi0 { brcm,board-type = "apple,honshu"; }; +&spi0 { + status = "okay"; + + touchbar0: touchbar@0 { + compatible = "apple,z2-touchscreen"; + reg = <0>; + spi-max-frequency = <11500000>; + reset-gpios = <&pinctrl_ap 139 0>; + cs-gpios = <&pinctrl_ap 109 0>; + interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>; + firmware-name = "apple/dfrmtfw-j293.bin"; + touchscreen-size-x = <23045>; + touchscreen-size-y = <640>; + apple,z2-device-name = "MacBookPro17,1 Touch Bar"; + }; +}; + /* * Remove unused PCIe ports and disable the associated DARTs. */
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 9859219699f4..70d3183f72bf 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi@@ -432,6 +432,18 @@ i2c4: i2c@235020000 { status = "disabled"; /* only used in J293 */ }; + spi0: spi@235100000 { + compatible = "apple,t8103-spi", "apple,spi"; + reg = <0x2 0x35100000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 614 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_200m>; + power-domains = <&ps_spi0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; /* only used in J293 */ + }; + serial0: serial@235200000 { compatible = "apple,s5l-uart"; reg = <0x2 0x35200000 0x0 0x1000>;
--
Git-137.1)
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel