mmc-controller.yaml defines "^mmc(@.*)?$" as node name pattern.
In preparation of adding schema-based validation fix the node name
in two affected files.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
  arch/arm64/boot/dts/amlogic/meson-axg.dtsi        | 2 +-
  arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 4 ++--
  2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 1648e67af..ed895fb32 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi

@@ -1883,7 +1883,7 @@ apb: bus@ffe00000 {
  			#size-cells = <2>;
  			ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
  
-			sd_emmc_b: sd@5000 {
+			sd_emmc_b: mmc@5000 {
  				compatible = "amlogic,meson-axg-mmc";
  				reg = <0x0 0x5000 0x0 0x800>;
  				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 1a931d5c2..80d82f739 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi

@@ -2321,7 +2321,7 @@ uart_A: serial@24000 {
  			};
  		};
  
-		sd_emmc_a: sd@ffe03000 {
+		sd_emmc_a: mmc@ffe03000 {
  			compatible = "amlogic,meson-axg-mmc";
  			reg = <0x0 0xffe03000 0x0 0x800>;
  			interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;

@@ -2333,7 +2333,7 @@ sd_emmc_a: sd@ffe03000 {
  			resets = <&reset RESET_SD_EMMC_A>;
  		};
  
-		sd_emmc_b: sd@ffe05000 {
+		sd_emmc_b: mmc@ffe05000 {
  			compatible = "amlogic,meson-axg-mmc";
  			reg = <0x0 0xffe05000 0x0 0x800>;
  			interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;