[PATCH v6 3/6] iommu/mediatek: Add error path for loop of mm_dts_parse
From: Yong Wu <yong.wu@mediatek.com>
Date: 2022-09-20 06:39:39
Also in:
linux-iommu, linux-mediatek, lkml
Subsystem:
iommu subsystem, mediatek iommu driver, the rest · Maintainers:
Joerg Roedel, Will Deacon, Yong Wu, Linus Torvalds
The mtk_iommu_mm_dts_parse will parse the smi larbs nodes. if the i+1
larb is parsed fail, we should put_device for the i..0 larbs.
There are two places need to comment:
1) The larbid may be not linear mapping, we should loop whole
the array in the error path.
2) I move this line position: "data->larb_imu[id].dev = &plarbdev->dev;"
before "if (!plarbdev->dev.driver)", That means set
data->larb_imu[id].dev before the error path. then we don't need
"platform_device_put(plarbdev)" again in probe_defer case. All depend
on "put_device" of the error path in error cases.
Fixes: d2e9a1102cfc ("iommu/mediatek: Contain MM IOMMU flow with the MM TYPE")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
drivers/iommu/mtk_iommu.c | 27 ++++++++++++++++++++-------
1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 83b279432406..97b721006a47 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c@@ -1053,8 +1053,10 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m u32 id; larbnode = of_parse_phandle(dev->of_node, "mediatek,larbs", i); - if (!larbnode) - return -EINVAL; + if (!larbnode) { + ret = -EINVAL; + goto err_larbdev_put; + } if (!of_device_is_available(larbnode)) { of_node_put(larbnode);
@@ -1067,14 +1069,16 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m plarbdev = of_find_device_by_node(larbnode); of_node_put(larbnode); - if (!plarbdev) - return -ENODEV; + if (!plarbdev) { + ret = -ENODEV; + goto err_larbdev_put; + } + data->larb_imu[id].dev = &plarbdev->dev; if (!plarbdev->dev.driver) { - platform_device_put(plarbdev); - return -EPROBE_DEFER; + ret = -EPROBE_DEFER; + goto err_larbdev_put; } - data->larb_imu[id].dev = &plarbdev->dev; component_match_add(dev, match, component_compare_dev, &plarbdev->dev); platform_device_put(plarbdev);
@@ -1109,6 +1113,15 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m return -EINVAL; } return 0; + +err_larbdev_put: + /* id may be not linear mapping, loop whole the array */ + for (i = MTK_LARB_NR_MAX - 1; i >= 0; i++) { + if (!data->larb_imu[i].dev) + continue; + put_device(data->larb_imu[i].dev); + } + return ret; } static int mtk_iommu_probe(struct platform_device *pdev)
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel