[PATCH v4 3/6] iommu/mediatek: Add error path for loop of mm_dts_parse
From: Yong Wu <yong.wu@mediatek.com>
Date: 2022-08-24 06:44:11
Also in:
linux-iommu, linux-mediatek, lkml
Subsystem:
iommu subsystem, mediatek iommu driver, the rest · Maintainers:
Joerg Roedel, Will Deacon, Yong Wu, Linus Torvalds
The mtk_iommu_mm_dts_parse will parse the smi larbs nodes. if the i+1
larb is parsed fail, we should put_device for the 0..i larbs.
There are two places need to comment:
1) The larbid may be not linear mapping, we should loop whole
the array in the error path.
2) I move this line position: "data->larb_imu[id].dev = &plarbdev->dev;"
That means set data->larb_imu[id].dev before the error path.
then we don't need "platform_device_put(plarbdev)" again while
probe_defer case. All depend on "put_device" in the error path in error
cases.
Fixes: d2e9a1102cfc ("iommu/mediatek: Contain MM IOMMU flow with the MM TYPE")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
drivers/iommu/mtk_iommu.c | 42 ++++++++++++++++++++++++++++-----------
1 file changed, 30 insertions(+), 12 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 9c5902207bef..f63d4210043d 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c@@ -1053,8 +1053,10 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m u32 id; larbnode = of_parse_phandle(dev->of_node, "mediatek,larbs", i); - if (!larbnode) - return -EINVAL; + if (!larbnode) { + ret = -EINVAL; + goto err_larbdev_put; + } if (!of_device_is_available(larbnode)) { of_node_put(larbnode);
@@ -1067,14 +1069,16 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m plarbdev = of_find_device_by_node(larbnode); of_node_put(larbnode); - if (!plarbdev) - return -ENODEV; + if (!plarbdev) { + ret = -ENODEV; + goto err_larbdev_put; + } + data->larb_imu[id].dev = &plarbdev->dev; if (!plarbdev->dev.driver) { - platform_device_put(plarbdev); - return -EPROBE_DEFER; + ret = -EPROBE_DEFER; + goto err_larbdev_put; } - data->larb_imu[id].dev = &plarbdev->dev; component_match_add(dev, match, component_compare_dev, &plarbdev->dev); platform_device_put(plarbdev);
@@ -1082,8 +1086,10 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m /* Get smi-(sub)-common dev from the last larb. */ smi_subcomm_node = of_parse_phandle(larbnode, "mediatek,smi", 0); - if (!smi_subcomm_node) - return -EINVAL; + if (!smi_subcomm_node) { + ret = -EINVAL; + goto err_larbdev_put; + } /* * It may have two level smi-common. the node is smi-sub-common if it
@@ -1097,8 +1103,10 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m pcommdev = of_find_device_by_node(smicomm_node); of_node_put(smicomm_node); - if (!pcommdev) - return -EINVAL; + if (!pcommdev) { + ret = -EINVAL; + goto err_larbdev_put; + } data->smicomm_dev = &pcommdev->dev; link = device_link_add(data->smicomm_dev, dev,
@@ -1106,9 +1114,19 @@ static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **m platform_device_put(pcommdev); if (!link) { dev_err(dev, "Unable to link %s.\n", dev_name(data->smicomm_dev)); - return -EINVAL; + ret = -EINVAL; + goto err_larbdev_put; } return 0; + +err_larbdev_put: + /* id may be not linear mapping, loop whole the array */ + for (i = 0; i < MTK_LARB_NR_MAX; i++) { + if (!data->larb_imu[i].dev) + continue; + put_device(data->larb_imu[i].dev); + } + return ret; } static int mtk_iommu_probe(struct platform_device *pdev)
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel