Thread (13 messages) flat view 13 messages, 2 authors, 2022-09-05

Re: [PATCH 08/11] arm64: dts: ls1043a: add gpio based i2c recovery information

From: Shawn Guo <shawnguo@kernel.org>
Date: 2022-09-05 01:06:55
Also in: linux-devicetree, lkml

On Wed, Aug 24, 2022 at 05:36:59PM -0500, Li Yang wrote:
quoted hunk ↗ jump to hunk
Add scl-gpios property for i2c recovery and add SoC specific compatible
string for SoC specific fixup.

Signed-off-by: Zhang Ying <redacted>
Signed-off-by: Li Yang <redacted>
---
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index b37244acf16a..20888aceb5f4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -538,7 +538,7 @@ dspi1: spi@2110000 {
 		};
 
 		i2c0: i2c@2180000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
@@ -553,7 +553,7 @@ i2c0: i2c@2180000 {
 		};
 
 		i2c1: i2c@2190000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
@@ -561,11 +561,12 @@ i2c1: i2c@2190000 {
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 2 0>;
Could you use the polarity define from include/dt-bindings/gpio/gpio.h?

Shawn
quoted hunk ↗ jump to hunk
 			status = "disabled";
 		};
 
 		i2c2: i2c@21a0000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21a0000 0x0 0x10000>;
@@ -573,11 +574,12 @@ i2c2: i2c@21a0000 {
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 10 0>;
 			status = "disabled";
 		};
 
 		i2c3: i2c@21b0000 {
-			compatible = "fsl,vf610-i2c";
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x21b0000 0x0 0x10000>;
@@ -585,6 +587,7 @@ i2c3: i2c@21b0000 {
 			clock-names = "i2c";
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 12 0>;
 			status = "disabled";
 		};
 
-- 
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help