[PATCH 03/11] arm64: dts: ls1043a: use pcie aer/pme interrupts
From: Li Yang <hidden>
Date: 2022-08-24 22:37:20
Also in:
linux-devicetree, lkml
Subsystem:
arm/freescale imx / mxc / layerscape arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
After the binding has been updated to include more specific interrupt definition, update the dts to use the more specific interrupt names. Signed-off-by: Po Liu <redacted> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Li Yang <redacted> --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 3ba66b18de35..242fe8bfab17 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi@@ -883,9 +883,9 @@ pcie1: pcie@3400000 { reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ <0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 118 0x4>, /* controller interrupt */ - <0 117 0x4>; /* PME interrupt */ - interrupt-names = "intr", "pme"; + interrupts = <0 117 0x4>, + <0 118 0x4>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci";
@@ -909,9 +909,9 @@ pcie2: pcie@3500000 { reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ <0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 128 0x4>, - <0 127 0x4>; - interrupt-names = "intr", "pme"; + interrupts = <0 127 0x4>, + <0 128 0x4>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci";
@@ -935,9 +935,9 @@ pcie3: pcie@3600000 { reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */ <0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 162 0x4>, - <0 161 0x4>; - interrupt-names = "intr", "pme"; + interrupts = <0 161 0x4>, + <0 162 0x4>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci";
--
2.37.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel