Thread (12 messages) 12 messages, 4 authors, 2022-08-31
STALE1375d REVIEWED: 1 (0M)
Revisions (6)
  1. v1 [diff vs current]
  2. v2 [diff vs current]
  3. v3 [diff vs current]
  4. v4 [diff vs current]
  5. v5 [diff vs current]
  6. v6 current

[PATCH v6 2/6] dt-bindings: net: dsa: mediatek,mt7530: fix description of mediatek,mcm

From: Arınç ÜNAL <hidden>
Date: 2022-08-25 08:24:21
Also in: linux-devicetree, linux-mediatek, lkml, netdev
Subsystem: networking drivers, networking [dsa], open firmware and flattened device tree bindings, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Fix the description of mediatek,mcm. mediatek,mcm is not used on MT7623NI.

Signed-off-by: Arınç ÜNAL <redacted>
Acked-by: Krzysztof Kozlowski <redacted>
---
 .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml         | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index c1dc712706c4..35a3039825bd 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -107,9 +107,8 @@ properties:
   mediatek,mcm:
     type: boolean
     description:
-      if defined, indicates that either MT7530 is the part on multi-chip
-      module belong to MT7623A has or the remotely standalone chip as the
-      function MT7623N reference board provided for.
+      Used for MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs which the MT7530
+      switch is a part of the multi-chip module.
 
   reset-gpios:
     maxItems: 1
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help