[PATCH net-next 2/7] dt-bindings: net: dsa: mediatek,mt7530: add passthrough mode
From: Caleb James DeLisle <cjd@cjdns.fr>
Date: 2026-09-09 14:04:24
Also in:
linux-devicetree, linux-mediatek, lkml, netdev
Subsystem:
networking drivers, networking [dsa], open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
MT7530 switches can be configured to blindly pass packets between their CPU/upstream port and a downstream DSA port, in particular, without altering the MediaTek DSA Tag on the packets. This mode is used in some integrations where an SoC integrated switch exists, but a more capable MCM switch is added to effectively replace it. Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr> --- .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 90b3582b7619..e29fb8693498 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml@@ -73,6 +73,13 @@ description: | Check out example 7. + The MT7530 and MT7531 switches are capable of being operated in "passthrough" + mode. In this mode, traffic is unconditionally passed between the CPU port + and the DSA port which links to a second switch. To use passthrough mode, the + upstream switch is configured with a DSA link to the downstream switch. In + passthrough mode the upstream switch is restricted, with no other ports or + switch configuration allowed. + properties: compatible: oneOf:
--
2.39.5