On Wed, Jul 13, 2022 at 04:03:56PM +0200, Greg Kroah-Hartman wrote:

On Wed, Jul 13, 2022 at 02:33:44PM +0100, Sudeep Holla wrote:

quoted

init_cpu_topology() is called only once at the boot and all the cache
attributes are detected early for all the possible CPUs. However when
the CPUs are hotplugged out, the cacheinfo gets removed. While the
attributes are added back when the CPUs are hotplugged back in as part
of CPU hotplug state machine, it ends up called quite late after the
update_siblings_masks() are called in the secondary_start_kernel()
resulting in wrong llc_sibling_masks.

Move the call to detect_cache_attributes() inside update_siblings_masks()
to ensure the cacheinfo is updated before the LLC sibling masks are
updated. This will fix the incorrect LLC sibling masks generated when
the CPUs are hotplugged out and hotplugged back in again.

Reported-by: Ionela Voinescu <redacted>
Signed-off-by: Sudeep Holla <redacted>
---
 drivers/base/arch_topology.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

Hi Conor,

Ionela reported an issue with the CPU hotplug and as a fix I need to
move the call to detect_cache_attributes() which I had thought to keep
it there from first but for no reason had moved it to init_cpu_topology().

Wonder if this fixes the -ENOMEM on RISC-V as this one is called on the
cpu in the secondary CPUs init path while init_cpu_topology executed
detect_cache_attributes() for all possible CPUs much earlier. I think
this might help as the percpu memory might be initialised in this case.

Anyways give this a try, also test the CPU hotplug and check if nothing
is broken on RISC-V. We noticed this bug only on one platform while

Regards,
Sudeep

diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
index 441e14ac33a4..0424b59b695e 100644
--- a/drivers/base/arch_topology.c
+++ b/drivers/base/arch_topology.c

@@ -732,7 +732,11 @@ const struct cpumask *cpu_clustergroup_mask(int cpu)
 void update_siblings_masks(unsigned int cpuid)
 {
 	struct cpu_topology *cpu_topo, *cpuid_topo = &cpu_topology[cpuid];
-	int cpu;
+	int cpu, ret;
+
+	ret = detect_cache_attributes(cpuid);
+	if (ret)
+		pr_info("Early cacheinfo failed, ret = %d\n", ret);

No erroring out?

No, this is optional as not all platforms have cacheinfo in the DT and also
the scheduler must work even without the cache information. It may not produce
optimal performance but it must work.

Also we have seen on one RISC-V platform with probably low percpu allocation,
the early detection fails, but it works just fine later device_initcall().
That was the main reason for adding error log, but the idea is to continue
building the information for the scheduler domains even if the LLC information
can't be obtained. In case of failure, we assume all CPUs have only private
caches and no shared LLC.

Hope that makes sense. Let me know if you prefer to drop the error log or
anything else. I just added as we found cases of -ENOMEM on RISC-V and we
want to highlight that.

-- 
Regards,
Sudeep

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel