Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
From: Krzysztof Kozlowski <hidden>
Date: 2022-06-01 10:37:41
Also in:
dmaengine, linux-devicetree, linux-i2c, linux-iio, linux-mediatek, linux-mmc, linux-phy, linux-serial, linux-spi, linux-usb, linux-watchdog, lkml
On 31/05/2022 15:50, Fabien Parent wrote:
quoted hunk ↗ jump to hunk
Add device-tree for the MT8365 SoC. More information can be found about that SoC at the following address: https://www.mediatek.com/products/aiot/i350-mt8365 Signed-off-by: Fabien Parent <redacted> --- arch/arm64/boot/dts/mediatek/mt8365.dtsi | 1047 ++++++++++++++++++++++ 1 file changed, 1047 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsidiff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi new file mode 100644 index 000000000000..e22b1d259418 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi@@ -0,0 +1,1047 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 MediaTek Inc. + */ + +#include <dt-bindings/clock/mediatek,mt8365-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/power/mt8365-power.h> +#include <dt-bindings/memory/mt8365-larb-port.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "mediatek,mt8365"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ovl0 = &ovl0; + rdma0 = &rdma0; + rdma1 = &rdma1; + color0 = &color0; + ccorr0 = &ccorr0; + aal0 = &aal0; + gamma0 = &gamma0; + dither0 = &dither0; + dsi0 = &dsi0; + dpi0 = &dpi0; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + clock-frequency = <1600000000>; + clocks = <&mcucfg CLK_MCU_BUS_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + clock-frequency = <1600000000>; + clocks = <&mcucfg CLK_MCU_BUS_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate", "armpll"; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + clock-frequency = <1600000000>; + clocks = <&mcucfg CLK_MCU_BUS_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate", "armpll"; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + clock-frequency = <1600000000>; + clocks = <&mcucfg CLK_MCU_BUS_SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate", "armpll"; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + enable-method = "psci"; + }; + }; + + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + opp-850000000 { + opp-hz = /bits/ 64 <850000000>; + opp-microvolt = <650000>; + }; + opp-918000000 { + opp-hz = /bits/ 64 <918000000>; + opp-microvolt = <668750>; + }; + opp-987000000 { + opp-hz = /bits/ 64 <987000000>; + opp-microvolt = <687500>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-microvolt = <706250>; + }; + opp-1125000000 { + opp-hz = /bits/ 64 <1125000000>; + opp-microvolt = <725000>; + }; + opp-1216000000 { + opp-hz = /bits/ 64 <1216000000>; + opp-microvolt = <750000>; + }; + opp-1308000000 { + opp-hz = /bits/ 64 <1308000000>; + opp-microvolt = <775000>; + }; + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <800000>; + }; + opp-1466000000 { + opp-hz = /bits/ 64 <1466000000>; + opp-microvolt = <825000>; + }; + opp-1533000000 { + opp-hz = /bits/ 64 <1533000000>; + opp-microvolt = <850000>; + }; + opp-1633000000 { + opp-hz = /bits/ 64 <1633000000>; + opp-microvolt = <887500>; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <912500>; + }; + opp-1767000000 { + opp-hz = /bits/ 64 <1767000000>; + opp-microvolt = <937500>; + }; + opp-1834000000 { + opp-hz = /bits/ 64 <1834000000>; + opp-microvolt = <962500>; + }; + opp-1917000000 { + opp-hz = /bits/ 64 <1917000000>; + opp-microvolt = <993750>; + }; + opp-2001000000 { + opp-hz = /bits/ 64 <2001000000>; + opp-microvolt = <1025000>; + }; + }; + + clk26m: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>;
This does not look like property of a SoC. Are you sure MT8365 SoC has this clock (not the board)?
+ clock-output-names = "clk26m";
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+ bl31_secmon_reserved: secmon@43000000 {
+ no-map;
+ reg = <0 0x43000000 0 0x20000>;
+ };
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ gic: interrupt-controller@c000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;Why do you have four cells here (and passing 0 as interrupt)?
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x0c000000 0 0x80000>,
+ <0 0x0c080000 0 0x80000>;
+
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ topckgen: syscon@10000000 {
+ compatible = "mediatek,mt8365-topckgen", "syscon";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ infracfg: syscon@10001000 {
+ compatible = "mediatek,mt8365-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pericfg: syscon@10003000 {
+ compatible = "mediatek,mt8365-pericfg", "syscon";
+ reg = <0 0x10003000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ syscfg_pctl: syscfg-pctl@10005000 {This is I guess also syscon, like other nodes?
+ compatible = "syscon";
You need specific compatible. Please run `make dtbs_check` and fix the errors.
+ reg = <0 0x10005000 0 0x1000>;
+ };
+
+ scpsys: syscon@10006000 {
+ compatible = "syscon", "simple-mfd";You need specific compatible.
+ reg = <0 0x10006000 0 0x1000>; + #power-domain-cells = <1>;
This is definitely wrong now. It's not a simple-mfd device, so please do not use that property.
+
+ /* System Power Manager */
+ spm: power-controller {
+ compatible = "mediatek,mt8365-power-controller";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ /* power domains of the SoC */The comment suggests you will later add here power domains not for the SoC. If that's not true, just skip the comment.
+ power-domain@MT8365_POWER_DOMAIN_MM {
+ reg = <MT8365_POWER_DOMAIN_MM>;
+ clocks = <&topckgen CLK_TOP_MM_SEL>,
+ <&mmsys CLK_MM_MM_SMI_COMMON>,
+ <&mmsys CLK_MM_MM_SMI_COMM0>,
+ <&mmsys CLK_MM_MM_SMI_COMM1>,
+ <&mmsys CLK_MM_MM_SMI_LARB0>;
+ clock-names = "mm", "mm-0", "mm-1",
+ "mm-2", "mm-3";
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ mediatek,infracfg_nao = <&infracfg_nao>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-domain@MT8365_POWER_DOMAIN_CAM {
+ reg = <MT8365_POWER_DOMAIN_CAM>;
+ clocks = <&camsys CLK_CAM_LARB2>,
+ <&camsys CLK_CAM_SENIF>,
+ <&camsys CLK_CAMSV0>,
+ <&camsys CLK_CAMSV1>,
+ <&camsys CLK_CAM_FDVT>,
+ <&camsys CLK_CAM_WPE>;
+ clock-names = "cam-0", "cam-1",
+ "cam-2", "cam-3",
+ "cam-4", "cam-5";
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ mediatek,smi = <&smi_common>;
+ };
+
+ power-domain@MT8365_POWER_DOMAIN_VDEC {
+ reg = <MT8365_POWER_DOMAIN_VDEC>;
+ #power-domain-cells = <0>;
+ mediatek,smi = <&smi_common>;
+ };
+
+ power-domain@MT8365_POWER_DOMAIN_VENC {
+ reg = <MT8365_POWER_DOMAIN_VENC>;
+ #power-domain-cells = <0>;
+ mediatek,smi = <&smi_common>;
+ };
+
+ power-domain@MT8365_POWER_DOMAIN_APU {
+ reg = <MT8365_POWER_DOMAIN_APU>;
+ clocks = <&infracfg CLK_IFR_APU_AXI>,
+ <&apu CLK_APU_IPU_CK>,
+ <&apu CLK_APU_AXI>,
+ <&apu CLK_APU_JTAG>,
+ <&apu CLK_APU_IF_CK>,
+ <&apu CLK_APU_EDMA>,
+ <&apu CLK_APU_AHB>;
+ clock-names = "apu", "apu-0",
+ "apu-1", "apu-2",
+ "apu-3", "apu-4",
+ "apu-5";
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ mediatek,smi = <&smi_common>;
+ };
+ };
+
+ power-domain@MT8365_POWER_DOMAIN_CONN {
+ reg = <MT8365_POWER_DOMAIN_CONN>;
+ clocks = <&topckgen CLK_TOP_CONN_32K>,
+ <&topckgen CLK_TOP_CONN_26M>;
+ clock-names = "conn", "conn1";
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ };
+
+ power-domain@MT8365_POWER_DOMAIN_MFG {
+ reg = <MT8365_POWER_DOMAIN_MFG>;
+ clocks = <&topckgen CLK_TOP_MFG_SEL>;
+ clock-names = "mfg";
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ };
+
+ power-domain@MT8365_POWER_DOMAIN_AUDIO {
+ reg = <MT8365_POWER_DOMAIN_AUDIO>;
+ clocks = <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+ <&infracfg CLK_IFR_AUDIO>,
+ <&infracfg CLK_IFR_AUD_26M_BK>;
+ clock-names = "audio", "audio1", "audio2";
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ };
+
+ power-domain@MT8365_POWER_DOMAIN_DSP {
+ reg = <MT8365_POWER_DOMAIN_DSP>;
+ clocks = <&topckgen CLK_TOP_DSP_SEL>,
+ <&topckgen CLK_TOP_DSP_26M>;
+ clock-names = "dsp", "dsp1";
+ #power-domain-cells = <0>;
+ mediatek,infracfg = <&infracfg>;
+ };
+ };
+ };
+
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt8365-wdt",
+ "mediatek,mt6589-wdt";
+ reg = <0 0x10007000 0 0x100>;
+ #reset-cells = <1>;
+ };
+
+ gpt: apxgpt@10008000 {Generic node names, so "timer"
+ compatible = "mediatek,mt8365-timer",
+ "mediatek,mt6577-timer";
+ reg = <0 0x10008000 0 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYS_26M_D2>;
+ clock-names = "clk13m";
+ };
+
+ pio: pinctrl@1000b000 {
+ compatible = "mediatek,mt8365-pinctrl";
+ reg = <0 0x1000b000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl>;
+ pins-are-numbered;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ apmixedsys: syscon@1000c000 {
+ compatible = "mediatek,mt8365-apmixedsys", "syscon";
+ reg = <0 0x1000c000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pwrap: pwrap@1000d000 {
+ compatible = "mediatek,mt8365-pwrap";
+ reg = <0 0x1000d000 0 0x1000>;
+ reg-names = "pwrap";
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&infracfg CLK_IFR_PWRAP_SPI>,
+ <&infracfg CLK_IFR_PMIC_AP>,
+ <&infracfg CLK_IFR_PWRAP_SYS>,
+ <&infracfg CLK_IFR_PWRAP_TMR>;
+ clock-names = "spi", "wrap", "sys", "tmr";
+ };
+
+ keypad: kp@10010000 {s/kp/keypad/
+ compatible = "mediatek,mt6779-keypad";
+ reg = <0 0x10010000 0 0x1000>;
+ wakeup-source;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
+ clocks = <&clk26m>;
+ clock-names = "kpd";
+ status = "disabled";
+ };
+
+ mcucfg: syscon@10200000 {
+ compatible = "mediatek,mt8365-mcucfg", "syscon";
+ reg = <0 0x10200000 0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ sysirq: intpol-controller@10200a80 {interrupt-controller
+ compatible = "mediatek,mt8365-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200a80 0 0x20>;
+ };
+
+ iommu: iommu@10205000 {
+ compatible = "mediatek,mt8365-m4u";
+ reg = <0 0x10205000 0 0x1000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_LOW>;
+ mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>;
+ #iommu-cells = <1>;
+ };
+
+ infracfg_nao: infracfg-nao@1020e000 {Other nodes are named syscon
+ compatible = "syscon";
No, syscon cannot be alone.
+ reg = <0 0x1020e000 0 0x1000>;
+ };
+
+ rng: rng@1020f000 {
+ compatible = "mediatek,mt8365-rng",
+ "mediatek,mt7623-rng";
+ reg = <0 0x1020f000 0 0x100>;
+ clocks = <&infracfg CLK_IFR_TRNG>;
+ clock-names = "rng";
+ };
+
+ apdma: dma-controller@11000280 {
+ compatible = "mediatek,mt8365-uart-dma",
+ "mediatek,mt6577-uart-dma";
+ reg = <0 0x11000280 0 0x80>,
+ <0 0x11000300 0 0x80>,
+ <0 0x11000380 0 0x80>,
+ <0 0x11000400 0 0x80>,
+ <0 0x11000580 0 0x80>,
+ <0 0x11000600 0 0x80>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+ dma-requests = <6>;
+ clocks = <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "apdma";
+ #dma-cells = <1>;
+ };
+
+ auxadc: adc@11001000 {
+ compatible = "mediatek,mt8365-auxadc",
+ "mediatek,mt8173-auxadc";
+ reg = <0 0x11001000 0 0x1000>;
+ clocks = <&infracfg CLK_IFR_AUXADC>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt8365-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x1000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
+ clock-names = "baud", "bus";
+ dmas = <&apdma 0
+ &apdma 1>;You need to split these into two phandles.
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt8365-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>;
+ clock-names = "baud", "bus";
+ dmas = <&apdma 2
+ &apdma 3>;Ditto.
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt8365-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x1000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>;
+ clock-names = "baud", "bus";
+ dmas = <&apdma 4
+ &apdma 5>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ pwm: pwm@11006000 {
+ compatible = "mediatek,mt8365-pwm";
+ reg = <0 0x11006000 0 0x1000>;
+ #pwm-cells = <2>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_IFR_PWM_HCLK>,
+ <&infracfg CLK_IFR_PWM>,
+ <&infracfg CLK_IFR_PWM1>,
+ <&infracfg CLK_IFR_PWM2>,
+ <&infracfg CLK_IFR_PWM3>;
+ clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
+ };
+
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt8365-i2c",
+ "mediatek,mt8168-i2c";
+ reg = <0 0x11007000 0 0xa0>,
+ <0 0x11000080 0 0x80>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C0_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt8365-i2c",
+ "mediatek,mt8168-i2c";
+ reg = <0 0x11008000 0 0xa0>,
+ <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C1_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt8365-i2c",
+ "mediatek,mt8168-i2c";
+ reg = <0 0x11009000 0 0xa0>,
+ <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C2_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi: spi@1100a000 {
+ compatible = "mediatek,mt8365-spi",
+ "mediatek,mt7622-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x1100a000 0 0x100>;Reg goes after compatible.
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&infracfg CLK_IFR_SPI0>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ thermal: thermal@1100b000 {
+ compatible = "mediatek,mt8365-thermal";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_IFR_THERM>,
+ <&infracfg CLK_IFR_AUXADC>;
+ clock-names = "therm", "auxadc";
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ nvmem-cells = <&thermal_calibration>;
+ nvmem-cell-names = "calibration-data";
+ #thermal-sensor-cells = <1>;
+ };
+
+ disp_pwm: disp-pwm@1100e000 {Generic node names, so "pwm"
+ compatible = "mediatek,mt8365-disp-pwm",
+ "mediatek,mt8183-disp-pwm";
+ reg = <0 0x1100e000 0 0x1000>;
+ #pwm-cells = <2>;
+ clocks = <&topckgen CLK_TOP_DISP_PWM_SEL>,
+ <&infracfg CLK_IFR_DISP_PWM>;
+ clock-names = "main", "mm";
+ power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@1100f000 {
+ compatible = "mediatek,mt8365-i2c",
+ "mediatek,mt8168-i2c";
+ reg = <0 0x1100f000 0 0xa0>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C3_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ ssusb: usb@11201000 {
+ compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3";
+ reg = <0 0x11201000 0 0x2e00>,
+ <0 0x11203e00 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>;
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u2port1 PHY_TYPE_USB2>;
+ clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+ <&infracfg CLK_IFR_SSUSB_REF>,
+ <&infracfg CLK_IFR_SSUSB_SYS>,
+ <&infracfg CLK_IFR_ICUSB>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck",
+ "dma_ck";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ usb_host: usb@11200000 {
+ compatible = "mediatek,mt8365-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x11200000 0 0x1000>;
+ reg-names = "mac";
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+ <&infracfg CLK_IFR_SSUSB_REF>,
+ <&infracfg CLK_IFR_SSUSB_SYS>,
+ <&infracfg CLK_IFR_ICUSB>,
+ <&infracfg CLK_IFR_SSUSB_XHCI>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck",
+ "dma_ck", "xhci_ck";
+ status = "disabled";
+ };
+ };
+
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+ reg = <0 0x11230000 0 0x1000>,
+ <0 0x11cd0000 0 0x1000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
+ <&infracfg CLK_IFR_MSDC0_HCLK>,
+ <&infracfg CLK_IFR_MSDC0_SRC>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11240000 {
+ compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+ reg = <0 0x11240000 0 0x1000>,
+ <0 0x11c90000 0 0x1000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
+ <&infracfg CLK_IFR_MSDC1_HCLK>,
+ <&infracfg CLK_IFR_MSDC1_SRC>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
+ ethernet: ethernet@112a0000 {
+ compatible = "mediatek,mt8365-eth";
+ reg = <0 0x112a0000 0 0x1000>;
+ mediatek,pericfg = <&infracfg>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_ETH_SEL>,
+ <&infracfg CLK_IFR_NIC_AXI>,
+ <&infracfg CLK_IFR_NIC_SLV_AXI>;
+ clock-names = "core", "reg", "trans";
+ status = "disabled";
+ };
+
+ mipi_tx0: dsi-phy@11c00000 {
+ compatible = "mediatek,mt8365-mipi-tx",
+ "mediatek,mt8183-mipi-tx";
+ reg = <0 0x11c00000 0 0x800>;
+ clocks = <&clk26m>;
+ clock-names = "ref_clk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ clock-output-names = "mipi_tx0_pll";
+ };
+
+ efuse: efuse@11c50000 {
+ compatible = "mediatek,mt8365-efuse", "mediatek,efuse";
+ reg = <0 0x11c50000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ thermal_calibration: calib@180 {
+ reg = <0x180 0xc>;
+ };
+ };
+
+ u3phy: t-phy@11cc0000 {s/t-phy/phy/
+ compatible = "mediatek,mt8365-tphy", + "mediatek,generic-tphy-v2"; + #address-cells = <2>; + #phy-cells = <1>;
address-cells, then size, then phy
+ #size-cells = <2>; + ranges; + status = "okay";
No need for status ok.
+
+ u2port0: usb-phy@11cc0000 {
+ reg = <0 0x11cc0000 0 0x400>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+ <&topckgen CLK_TOP_USB20_48M_EN>;
+ clock-names = "ref", "da_ref";
+ #phy-cells = <1>;
+ status = "okay";Ditto
+ };
+
+ u2port1: usb-phy@11cc1000 {
+ reg = <0 0x11cc1000 0 0x400>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+ <&topckgen CLK_TOP_USB20_48M_EN>;
+ clock-names = "ref", "da_ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
+ mfgcfg: syscon@13000000 {
+ compatible = "mediatek,mt8365-mfgcfg", "syscon";
+ reg = <0 0x13000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ mmsys: syscon@14000000 {
+ compatible = "mediatek,mt8365-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ mutex: mutex@14001000 {
+ compatible = "mediatek,mt8365-disp-mutex";
+ reg = <0 0x14001000 0 0x1000>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+ };
+
+ smi_common: smi@14002000 {s/smi/memory-controller/ in node name?
+ compatible = "mediatek,mt8365-smi-common",
+ "mediatek,mt8186-smi-common";
+ reg = <0 0x14002000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_MM_SMI_COMMON>,
+ <&mmsys CLK_MM_MM_SMI_COMMON>,
+ <&mmsys CLK_MM_MM_SMI_COMM0>,
+ <&mmsys CLK_MM_MM_SMI_COMM1>;
+ clock-names = "apb", "smi", "gals0", "gals1";
+ power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+ };
+
+ larb0: larb@14003000 {The same?
+ compatible = "mediatek,mt8365-smi-larb", + "mediatek,mt8186-smi-larb"; + reg = <0 0x14003000 0 0x1000>; + mediatek,smi = <&smi_common>; + clocks = <&mmsys CLK_MM_MM_SMI_LARB0>, + <&mmsys CLK_MM_MM_SMI_LARB0>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
Best regards, Krzysztof _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel