Re: [PATCH v7 7/8] PCI: imx6: Disable enabled clocks and regulators after link is down
From: Bjorn Helgaas <helgaas@kernel.org>
Date: 2022-02-23 17:50:25
Also in:
linux-pci, lkml
In subject, s/Disable enabled clocks/Disable clocks/ On Wed, Feb 16, 2022 at 02:21:02PM +0800, Richard Zhu wrote:
Since i.MX PCIe doesn't support the hot-plug, and to save power consumption as much as possible. Return error and disable the enabled clocks and regulators when link is down,.
Maybe: Since i.MX PCIe doesn't support hot-plug, reduce power consumption as much as possible by disabling clocks and regulators and returning error when the link is down.
quoted hunk ↗ jump to hunk
Add a new host_exit() callback for i.MX PCIe driver to disable the enabled clocks, regulators and so on in the error handling after host_init is finished. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> --- drivers/pci/controller/dwc/pci-imx6.c | 30 ++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-)diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 242d8ef73c1e..fe671e88ec93 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c@@ -848,7 +848,9 @@ static int imx6_pcie_start_link(struct dw_pcie *pci) /* Start LTSSM. */ imx6_pcie_ltssm_enable(dev); - dw_pcie_wait_for_link(pci); + ret = dw_pcie_wait_for_link(pci); + if (ret) + goto err_reset_phy;
These labels look wrong now, since you no longer reset the PHY at err_reset_phy.
quoted hunk ↗ jump to hunk
if (pci->link_gen == 2) { /* Allow Gen2 mode after the link is up. */@@ -884,7 +886,9 @@ static int imx6_pcie_start_link(struct dw_pcie *pci) } /* Make sure link training is finished as well! */ - dw_pcie_wait_for_link(pci); + ret = dw_pcie_wait_for_link(pci); + if (ret) + goto err_reset_phy; } else { dev_info(dev, "Link: Gen2 disabled\n"); }@@ -897,7 +901,6 @@ static int imx6_pcie_start_link(struct dw_pcie *pci) dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n", dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0), dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1)); - imx6_pcie_reset_phy(imx6_pcie); return ret; }@@ -921,8 +924,29 @@ static int imx6_pcie_host_init(struct pcie_port *pp) return 0; } +static void imx6_pcie_host_exit(struct pcie_port *pp) +{ + struct dw_pcie *pci = to_dw_pcie_from_pp(pp); + struct device *dev = pci->dev; + struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci); + + imx6_pcie_reset_phy(imx6_pcie); + imx6_pcie_clk_disable(imx6_pcie); + switch (imx6_pcie->drvdata->variant) { + case IMX8MM: + if (phy_power_off(imx6_pcie->phy)) + dev_err(dev, "unable to power off phy\n"); + break; + default: + break; + } + if (imx6_pcie->vpcie) + regulator_disable(imx6_pcie->vpcie); +} + static const struct dw_pcie_host_ops imx6_pcie_host_ops = { .host_init = imx6_pcie_host_init, + .host_exit = imx6_pcie_host_exit, }; static const struct dw_pcie_ops dw_pcie_ops = {-- 2.25.1
_______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel